RUBI TX-700-N 17970 Manual Tile Cutter

1. ভূমিকা এবং ওভারview

The RUBI TX-700-N manual tile cutter is engineered for precise and efficient cutting of ceramic tiles, including those with high resistance to abrasion. This robust tool is suitable for professional use, offering a cutting length of 71 cm and a diagonal cutting capacity of approximately 50 x 50 cm. Its design incorporates a mobile breaker with 1000 kg breaking power, chrome-plated steel guides for durability, and an advanced angular measurement system for accurate cuts.

মূল বৈশিষ্ট্য অন্তর্ভুক্ত:

• Mobile breaker with 1000 kg breaking power for demanding materials.
• Chrome-plated steel guides for corrosion resistance and smooth operation.
• Fast-fix angular measurement system with central pivot for 0-45º cuts.
• Side stop for repetitive straight and diagonal cuts.
• Two-layer base with shock-absorbing effect.
• High-resistance aluminum base.
• Interchangeable scoring wheels (Ø 8-22 mm compatible).

2. নিরাপত্তা নির্দেশাবলী

Always adhere to the following safety guidelines when operating the RUBI TX-700-N tile cutter:

• উপযুক্ত ব্যক্তিগত সুরক্ষামূলক সরঞ্জাম (PPE) পরুন: Always use safety glasses to protect against flying debris. Gloves are recommended to prevent cuts.
• Ensure a stable work surface: Place the tile cutter on a flat, stable, and non-slip surface to prevent movement during operation.
• হাত পরিষ্কার রাখুন: Never place hands or fingers near the scoring wheel or breaker mechanism during operation.
• ব্যবহারের আগে সরঞ্জামটি পরীক্ষা করুন: Check for any damaged parts, loose components, or worn scoring wheels. Do not use the tool if it is damaged.
• Proper tile placement: Ensure the tile is correctly positioned and secured before scoring and breaking.
• Use correct scoring wheel: Select the appropriate scoring wheel for the type and thickness of the tile being cut.
• নিরাপদে সংরক্ষণ করুন: When not in use, store the tile cutter in its case in a dry, secure location, out of reach of children.

3. প্যাকেজ বিষয়বস্তু

আনপ্যাক করার সময়, সমস্ত উপাদান উপস্থিত আছে কিনা তা যাচাই করুন:

• RUBI TX-700-N Manual Tile Cutter
• Scoring wheel (typically Ø 10 mm or Ø 22 mm, interchangeable)
• Side stop / Angular measurement guide
• পরিবহন মামলা
• নির্দেশিকা ম্যানুয়াল (এই নথি)

Figure 1: RUBI TX-700-N Manual Tile Cutter with its transport case.

4. সেটআপ

Follow these steps to set up your RUBI TX-700-N tile cutter:

1. ইউনিটটি খুলে ফেলুন: Carefully remove the tile cutter and all accessories from the transport case.
2. Position the cutter: Place the tile cutter on a firm, level, and stable work surface. Ensure there is adequate space around the machine for tile handling.
3. Attach the side stop/angular guide: Insert the side stop into its designated slot on the base. Secure it if necessary, ensuring it can pivot freely for angular cuts or be fixed for straight cuts.
4. Install the scoring wheel: Ensure the correct scoring wheel (Ø 8-22 mm compatible) is securely fitted into the scoring carriage. Refer to the maintenance section for changing scoring wheels.

Figure 2: Close-up of the angular measurement system and side stop.

5. অপারেটিং নির্দেশাবলী

The RUBI TX-700-N tile cutter operates in two main stages: scoring and breaking.

5.1. Preparing the Tile

• Measure and mark: Use a pencil or marker to clearly indicate the desired cut line on the tile.
• Position the tile: Place the tile on the cutter's base, aligning the marked cut line with the scoring line indicator on the machine. For straight cuts, use the side stop. For diagonal cuts (0-45º), adjust the angular measurement system to the desired angle and secure the tile against it.

5.2. Scoring the Tile

• Lower the handle: Bring the scoring handle down so the scoring wheel makes contact with the tile surface.
• Apply even pressure: Apply firm, consistent pressure to the handle.
• Score in one pass: Push the scoring carriage along the tile in a single, continuous motion from the edge closest to you to the far edge. A clear, audible score line should be visible. Avoid multiple passes, as this can weaken the tile and lead to an uneven break.

Figure 3: Detail of the scoring wheel and mobile breaker mechanism.

5.3. Breaking the Tile

• Position the breaker: After scoring, move the scoring carriage so the mobile breaker is directly over the scored line, typically near the center of the tile.
• Apply breaking pressure: Apply a quick, firm downward pressure on the handle. The 1000 kg breaking power will cleanly separate the tile along the scored line.
• Remove cut pieces: Carefully remove the two separated tile pieces.

চিত্র 4: সামগ্রিকভাবে view of the RUBI TX-700-N during operation.

6. রক্ষণাবেক্ষণ

Regular maintenance ensures the longevity and optimal performance of your RUBI TX-700-N tile cutter:

• প্রতিটি ব্যবহারের পরে পরিষ্কার করুন: Remove tile dust and debris from the guides, base, and scoring carriage using a brush or compressed air.
• Lubricate guides: Periodically apply a light lubricant to the chrome-plated steel guides to ensure smooth movement of the scoring carriage.
• Inspect scoring wheel: Regularly check the scoring wheel for wear, chips, or damage. A dull or damaged wheel will result in poor cuts.
• Replace scoring wheel: To replace the scoring wheel, consult the mechanism on the scoring carriage. Typically, this involves loosening a screw or clip, removing the old wheel, and inserting a new one of the appropriate size (Ø 8-22 mm compatible). Ensure it is securely fastened.
• সঠিকভাবে সংরক্ষণ করুন: Store the tile cutter in its transport case in a dry environment to prevent corrosion and damage.

7. সমস্যা সমাধান

If you encounter issues with your tile cutter, consider the following common solutions:

• Uneven or chipped cuts:
  • Check if the scoring wheel is worn or damaged. Replace if necessary.
  • Ensure consistent pressure is applied during scoring.
  • Verify the tile is clean and free of debris on the cutting surface.
  • Confirm the tile is properly seated on the base and not rocking.
• Difficulty scoring:
  • The scoring wheel might be dull or incorrect for the tile type.
  • Guides may be dirty or require lubrication.
• Tile not breaking cleanly:
  • Ensure the score line is deep and continuous.
  • Verify the breaker is positioned directly over the score line.
  • Apply firm and quick pressure to the breaker handle.
• Scoring carriage sticking:
  • Clean the guides thoroughly.
  • Apply lubricant to the guides.

এই ধাপগুলির মাধ্যমেও যদি সমস্যার সমাধান না হয়, তাহলে অনুগ্রহ করে গ্রাহক সহায়তার সাথে যোগাযোগ করুন।

8. স্পেসিফিকেশন

9. ওয়্যারেন্টি এবং সমর্থন

The RUBI TX-700-N tile cutter comes with a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms and conditions, including warranty period and coverage.

For technical support, spare parts, or warranty claims, please contact your authorized RUBI dealer or the manufacturer's customer service department. Keep your proof of purchase and model number (TX-700-N, 17970) readily available when seeking assistance.