BNT Dummy Fake Security Camera (Model BNT-K8FaCam-2PW) Instruction Manual

1. ভূমিকা

The BNT Dummy Fake Security Camera is designed to provide a realistic visual deterrent against potential intruders. Its appearance closely mimics that of a functional surveillance camera, aiming to reduce the likelihood of criminal activity by creating the impression of active monitoring. This manual provides essential information for the proper setup, operation, and maintenance of your dummy camera.

Image 1.1: Two BNT white dummy fake security cameras, showcasing their realistic design.

৩.১. বাক্সে কী আছে

আপনার প্যাকেজটি খোলার পর, আপনি নিম্নলিখিত উপাদানগুলি খুঁজে পাবেন:

• BNT Bullet Simulation Fake Camera (White) x 2
• ইনস্টলেশনের জন্য screws
• ব্যবহারকারী ম্যানুয়াল (এই দস্তাবেজ)
• Warning Security Alert Sticker Decal x 2

Image 2.1: Package contents showing two dummy cameras, warning stickers, and screws.

3. বৈশিষ্ট্য

• বাস্তবসম্মত ডিজাইন: Mimics the appearance of a real surveillance camera.
• ঝলকানি LED আলো: Features a built-in red LED light that illuminates at night, simulating active recording.
• আলোক-বিদ্যুৎ সেন্সর: Automatically activates the red LED light in low-light conditions.
• টেকসই নির্মাণ: Made from Acrylonitrile Butadiene Styrene (ABS) for indoor and outdoor use.
• আবহাওয়ারোধী: IP65 International Protection Rating ensures resistance to water.
• সহজ ইনস্টলেশন: No wiring required, mounts easily to ceilings or walls.
• সামঞ্জস্যযোগ্য কোণ: Features 2-axis rotation for flexible positioning (360-degree rotation, 90-degree tilt).
• শক্তি উৎস: Operates on 2 AA batteries (not included).

Image 3.1: Close-up of the dummy camera's front, showing the dummy lens, red LED, and rotation capabilities.

4. সেটআপ এবং ইনস্টলেশন

4.1. ব্যাটারি ইনস্টলেশন

1. Locate the battery compartment on the camera. This is typically found by sliding open the back cover.
2. সঠিক পোলারিটি (+/-) নিশ্চিত করে, বগিতে 2টি AA ব্যাটারি (অন্তর্ভুক্ত নয়) ঢোকান।
3. ব্যাটারি কম্পার্টমেন্ট নিরাপদে বন্ধ করুন.

Image 4.1: Illustration of battery insertion into the dummy camera.

4.2. ক্যামেরা মাউন্ট করা

The camera can be easily installed on a ceiling or wall using the provided screws. No complex wiring is necessary.

1. Choose a suitable location for installation, considering visibility and desired deterrent effect.
2. Position the mounting base against the surface and mark the screw holes.
3. Drill pilot holes if necessary, then secure the mounting base with the provided screws.
4. মাউন্ট করা বেসের সাথে ক্যামেরাটি সংযুক্ত করুন।
5. Adjust the camera's angle using its 2-axis rotation feature to achieve the desired coverage.

Video: BNT Dummy Fake Security Camera Overview

ভিডিও ১: এই ভিডিওটি একটি সাধারণ ওভার প্রদান করেview of the BNT Dummy Fake Security Camera, highlighting its features and realistic appearance.

Video: Protecting Property with Fake Cameras

Video 4.2.2: This video demonstrates how fake cameras can be used to enhance property security and deter potential threats.

5. অপারেটিং নির্দেশাবলী

The BNT Dummy Fake Security Camera is designed for simple, autonomous operation:

• Once batteries are installed, the built-in photoelectric sensor will detect ambient light levels.
• During daylight hours, the red LED light will remain off.
• As darkness falls, the photoelectric sensor will automatically activate the red LED light, causing it to illuminate. This simulates the operation of a real security camera's night vision or recording indicator.
• The camera provides 24/7 visual deterrence without any manual intervention after initial setup.

Image 5.1: The dummy camera's red LED light is active at night, providing a visual deterrent.

6. রক্ষণাবেক্ষণ

• ব্যাটারি প্রতিস্থাপন: When the red LED light dims or stops illuminating, it is time to replace the batteries. Ensure to use high-quality AA batteries to prevent leakage and damage to the battery case.
• পরিবেশ সুরক্ষা: When replacing batteries, take care to avoid exposing the internal components to rain or moisture to maintain the lifespan of the battery case.
• নিষ্পত্তি: Please dispose of used batteries properly according to local regulations to protect the environment.
• পরিষ্কার করা: Periodically wipe the camera's exterior with a soft, damp ধুলো এবং ধ্বংসাবশেষ অপসারণ কাপড়. কঠোর রাসায়নিক ব্যবহার এড়িয়ে চলুন.

7. সমস্যা সমাধান

7.1. LED Light Not Illuminating at Night

• ব্যাটারি পরীক্ষা করুন: Ensure that 2 AA batteries are correctly installed and are not depleted. Replace if necessary.
• Test Photoelectric Sensor: In a dark environment, cover the LED light with your hand. If the red LED light turns on, the product is functioning correctly. If it does not, check battery installation again.
• পরিবেশগত কারণসমূহ: Ensure the camera is not installed in an area with ambient light at night (e.g., streetlights, porch lights) that might prevent the photoelectric sensor from detecting sufficient darkness to activate the LED.

8. স্পেসিফিকেশন

9. ওয়্যারেন্টি এবং সমর্থন

BNT provides reliable 24-month after-sales service for this product. If you have any questions, concerns, or require assistance with your BNT Dummy Fake Security Camera, please contact our dedicated customer service team. We are committed to ensuring your satisfaction.