KOBB KBS10A

KOBB KBS10A 6/12V 200A Digital Battery Charger User Manual

Model: KBS10A

ভূমিকা

Thank you for choosing the KOBB KBS10A Digital Battery Charger. This device is designed to charge and maintain 6V and 12V batteries up to 200 Ampere-hours (Ah). It features advanced microprocessor technology for automatic analysis and adjustment of charging parameters based on battery type, capacity, and discharge level. The KBS10A also includes desulfation and battery repair functions, ensuring optimal battery health and extended lifespan. Please read this manual carefully before use to ensure safe and efficient operation.

নিরাপত্তা তথ্য

  • ব্যাটারি নিয়ে কাজ করার সময় সর্বদা চোখের সুরক্ষা এবং প্রতিরক্ষামূলক পোশাক পরুন।
  • Ensure adequate ventilation in the charging area.
  • Never charge a frozen battery. Allow it to thaw before charging.
  • Do not smoke or allow sparks or flames near the battery or charger.
  • Connect the charger to the battery before plugging it into an AC outlet. Disconnect from AC power before disconnecting from the battery.
  • লাল (+) cl সংযোগ করুনamp to the positive battery terminal and the black (-) clamp নেতিবাচক ব্যাটারি টার্মিনালে।
  • ব্যাটারির শর্ট সার্কিট এড়িয়ে চলুন।amps.
  • Keep the charger away from water, oil, and dust to maintain its IP65 rating.
  • If the battery is deeply discharged (below 3V), the charger may not detect it immediately. Follow specific instructions for deeply discharged batteries.

পণ্য বৈশিষ্ট্য

  • বহুমুখী চার্জিং: Supports 6V and 12V batteries up to 200Ah, including Lead-Acid (Wet), Gel, MF, AGM, EFB, VRLA, and LiFePO4 Lithium batteries.
  • Battery Revitalization: Cleans sulfate and oxidation from battery plates and performs repair operations to restore battery performance.
  • উন্নত চার্জিং প্রযুক্তি: একটি 10-s বৈশিষ্ট্যযুক্তtage charging program for comprehensive and efficient battery care.
  • Intelligent Operation: Microprocessor-controlled for automatic battery analysis and optimal charging parameter selection.
  • সর্ব-আবহাওয়া কর্মক্ষমতা: Designed for superior charging capacity in both hot (up to 40°C) and cold (down to -20°C) conditions.
  • ব্যাপক নিরাপত্তা: Includes temperature compensation, reverse polarity protection, overheating protection, overload protection, spark-proof connections, short circuit protection, low voltage protection, and high voltagই সুরক্ষা।
  • টেকসই ডিজাইন: IP65 rated for water, dust, and oil resistance, ensuring reliability in various environments.
  • গভীর স্রাব পুনরুদ্ধার: Capable of charging deeply discharged batteries with voltag৪.৫V এর মতো কম।
KOBB KBS10A charger connected to a car battery, illustrating various safety features like temperature compensation, reverse polarity protection, overheating protection, overload protection, spark-proof, short circuit protection, low voltage protection, and high voltagই সুরক্ষা।

Image: The KOBB KBS10A charger features advanced safety technology, protecting against common electrical issues during charging.

KOBB KBS10A charger displaying IP65 protection against water, dust, and oil, shown in different environmental conditions.

Image: The KOBB KBS10A charger boasts an IP65 rating, making it resistant to water, dust, and oil for enhanced durability.

প্যাকেজ বিষয়বস্তু

The KOBB KBS10A package includes the following items:

  • KOBB KBS10A Digital Battery Charger
  • ব্যাটারি Clamps (Alligator Clips)
  • Ring Terminal Connectors with Fuse
  • স্টোরেজ ব্যাগ
  • ব্যবহারকারীর ম্যানুয়াল
KOBB KBS10A battery charger with its included accessories: alligator clips, ring terminals, and a storage bag.

Image: The KOBB KBS10A charger comes with essential accessories for versatile battery connection and convenient storage.

সেটআপ

  1. ব্যাটারি প্রস্তুত করুন: ব্যাটারি টার্মিনালগুলি পরিষ্কার এবং ক্ষয়মুক্ত রয়েছে তা নিশ্চিত করুন। প্রয়োজনে, তারের ব্রাশ দিয়ে পরিষ্কার করুন।
  2. ব্যাটারির সাথে সংযোগ করুন:
    • Connect the red (+) charger clamp or ring terminal to the positive (+) battery terminal.
    • Connect the black (-) charger clamp or ring terminal to the negative (-) battery terminal.
    • সংযোগ সুরক্ষিত নিশ্চিত করুন.
  3. এসি পাওয়ারের সাথে সংযোগ করুন: Plug the charger's AC power cord into a suitable electrical outlet. The charger will power on and begin its initial analysis.
  4. চার্জিং মোড নির্বাচন করুন: Press the 'MODE' button to select the appropriate charging mode for your battery type (see Operating Instructions for details).
KOBB KBS10A charger connected to a car battery, showing the display and connections.

Image: The KOBB KBS10A charger properly connected to a car battery, ready for operation.

অপারেটিং নির্দেশাবলী

মোড নির্বাচন

After connecting the charger to the battery and AC power, use the 'MODE' button to cycle through the available charging programs. The charger will automatically detect the battery voltage (6V or 12V) and suggest a mode. Confirm or change the mode as needed for your specific battery type.

  • STD: Standard Lead-Acid batteries.
  • AGM/C: AGM (Absorbed Glass Mat) batteries and Cold Weather charging.
  • জেল: Gel Cell batteries.
  • ওয়েট: Wet Cell (Flooded) batteries.
  • EFB: Enhanced Flooded Batteries.
  • CA: Calcium batteries.
  • LFP / 12V LiFePO4: Lithium Iron Phosphate batteries (12V).
  • RECOND MODE: Recondition mode for deeply discharged or sulfated batteries.
  • SUPPLY MODE: একটি ধ্রুবক ভলিউম প্রদান করেtage output for powering 12V devices or maintaining battery voltage during vehicle diagnostics.
KOBB KBS10A charger connected to various battery types, showing different charging modes like AGM/C, GEL, LFP, EFB, SUPPLY MODE, STD, WET, CA, 12V LiFePO4, and RECOND MODE.

Image: The KOBB KBS10A charger offers multiple modes for charging and maintaining various 6V/12V battery types.

10-এসtagই চার্জিং প্রোগ্রাম

The KOBB KBS10A utilizes a sophisticated 10-stage charging process to optimize battery performance and longevity:

  1. সক্রিয়করণ: Initiates charging for batteries with voltage 3V এর উপরে।
  2. সালফেশন: Applies pulse voltage to break down lead sulfate crystals, improving battery capacity.
  3. নরম শুরু: Gradually increases current to prevent damage to deeply discharged batteries.
  4. Bulk Charge (Constant Current): Charges the battery at maximum current until it reaches approximately 80% capacity.
  5. Absorption Charge (Constant Voltagই): ব্যাটারিকে একটি ধ্রুবক ভলিউমে চার্জ করেtage, gradually reducing current until 100% capacity is reached.
  6. বিশ্লেষণ: Tests the battery's ability to hold a charge.
  7. পুনর্নির্মাণ: A special mode for restoring deeply discharged or sulfated batteries.
  8. ফ্লোট চার্জ: Maintains the battery at full charge by providing a constant, low voltage.
  9. Pulse Maintenance: Applies small pulses of current to keep the battery optimized during long-term storage.
  10. সমীকরণ: কোষের ভলিউম ভারসাম্য করেtages in certain battery types to maximize performance.
Graph illustrating the 10-stage charging program of the KOBB KBS10A charger, showing voltage and current curves over time for each stage.

Image: Detailed graph of the 10-stage charging program, demonstrating the intelligent charging cycle for optimal battery health.

Charging Deeply Discharged Batteries

The KBS10A can charge batteries with voltages as low as 3V. If a battery is severely discharged, the charger may take a moment to recognize it. Ensure proper connection and select the appropriate mode. The charger will automatically initiate a soft start or recondition cycle if needed.

KOBB KBS10A charger connected to a deeply discharged battery, indicating its ability to charge batteries down to 3V.

Image: The KOBB KBS10A is capable of charging deeply discharged batteries, even those with voltag৪.৫V এর মতো কম।

রক্ষণাবেক্ষণ

  • পরিষ্কার করা: পরিষ্কার করার আগে চার্জারটি এসি পাওয়ার এবং ব্যাটারি থেকে বিচ্ছিন্ন করুন। বাইরের অংশটি নরম, ডি দিয়ে মুছুন।amp কাপড় কঠোর রাসায়নিক বা ঘর্ষণকারী ব্যবহার করবেন না।
  • সঞ্চয়স্থান: ব্যবহার না করার সময় চার্জারটি ঠান্ডা, শুষ্ক জায়গায় সংরক্ষণ করুন। সরাসরি সূর্যের আলো এবং চরম তাপমাত্রা থেকে দূরে রাখুন।
  • তারের পরিদর্শন: Regularly inspect the charging cables and connectors for any signs of damage, fraying, or corrosion. Replace damaged components immediately.
  • ব্যাটারি টার্মিনাল: ভালো বৈদ্যুতিক যোগাযোগ নিশ্চিত করতে ব্যাটারি টার্মিনালগুলি পরিষ্কার রাখুন।

সমস্যা সমাধান

সমস্যাসম্ভাব্য কারণসমাধান
চার্জারটি চালু হয় না।No AC power; Faulty outlet.Check AC power connection; Try a different outlet.
Charger not detecting battery.Poor connection; Battery voltage too low (below 3V); Incorrect mode selected.Cl নিশ্চিত করুনamps are securely connected; For very low voltage batteries, ensure connections are solid and allow time for detection; Select correct mode.
Charging process is slow.Large battery capacity; Deeply discharged battery; Cold ambient temperature.This is normal for large or deeply discharged batteries. Charging speed is optimized for battery health. Ensure charger is in a suitable temperature environment.
Charger displays an error.Reverse polarity; Short circuit; Overheating.Check battery connections for correct polarity; Inspect cables for short circuits; Allow charger to cool down if it's overheating.

স্পেসিফিকেশন

  • মডেল: KBS10A
  • ইনপুট ভলিউমtage: 220-240V AC, 50/60Hz (Typical for TR market)
  • আউটপুট ভলিউমtage: 6V / 12V DC
  • চার্জিং বর্তমান: 10 Ampআগে
  • ব্যাটারি ক্ষমতা: 200Ah পর্যন্ত
  • সমর্থিত ব্যাটারি প্রকার: Lead-Acid (Wet), Gel, MF, AGM, EFB, VRLA, LiFePO4
  • ন্যূনতম শুরু ভলিউমtage: 3V
  • মাত্রা: 18 x 7 x 34 সেমি
  • ওজন: 1.07 কিলোগ্রাম
  • সুরক্ষা রেটিং: IP65 (Waterproof, Dustproof, Oil-proof)
  • নিরাপত্তা বৈশিষ্ট্য: Temperature Compensation, Reverse Polarity Protection, Overheating Protection, Overload Protection, Spark-Proof, Short Circuit Protection, Low Voltage Protection, High Voltage সুরক্ষা।

ওয়্যারেন্টি এবং সমর্থন

KOBB products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your product or contact your retailer. If you encounter any issues or have questions regarding the KOBB KBS10A charger, please contact KOBB customer support or the seller from whom you purchased the product for assistance.

For further information, you may visit the official KOBB store: KOBB Store on Amazon.com.tr

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.