ভূমিকা
This manual provides essential information for the safe and effective use of your Philips 7388 20 Watt 6 Volt Halogen Bulb. Please read these instructions carefully before installation and operation to ensure optimal performance and longevity of the product.
The Philips 7388 halogen bulb is designed to produce a comfortable, warm white light, maintaining its luminous efficiency throughout its operational life. It features a G4 socket and is suitable for various lighting applications.
নিরাপত্তা তথ্য
সর্বদা নিম্নলিখিত নিরাপত্তা সতর্কতাগুলি পালন করুন:
- যন্ত্র বন্ধ: Always disconnect power to the fixture before installing, removing, or cleaning the bulb.
- যত্ন সহকারে পরিচালনা করুন: Halogen bulbs can become very hot. Allow the bulb to cool completely before handling.
- যোগাযোগ এড়ানো: Do not touch the glass part of the bulb with bare hands. Oils from your skin can create hot spots, leading to premature failure. Use a clean cloth or gloves if necessary.
- সঠিক ভলিউমtage: Ensure the fixture's voltage matches the bulb's voltage (6 Volts). Using an incorrect voltage can damage the bulb or the fixture.
- সঠিক ফিক্সচার: Use only in fixtures designed for halogen bulbs and with appropriate wattagই রেটিং।
- নিষ্পত্তি: স্থানীয় নিয়ম অনুসারে ব্যবহৃত বাল্বগুলি নষ্ট করে ফেলুন।
সেটআপ এবং ইনস্টলেশন
সঠিক ইনস্টলেশনের জন্য এই পদক্ষেপগুলি অনুসরণ করুন:
- Step 1: Power Disconnection
Ensure the power supply to the lighting fixture is turned off at the circuit breaker or by unplugging the fixture. - Step 2: Remove Old Bulb (if applicable)
If replacing an existing bulb, allow it to cool completely. Gently pull the old G4 bulb straight out from its socket. - Step 3: Prepare New Bulb
Carefully remove the new Philips 7388 bulb from its packaging. Avoid touching the glass envelope with bare hands. If you accidentally touch it, wipe it clean with a lint-free cloth moistened with rubbing alcohol. - Step 4: Insert New Bulb
Align the two pins of the G4 bulb with the holes in the socket. Gently push the bulb straight into the socket until it is fully seated. Do not force it. - ধাপ 5: শক্তি পুনরুদ্ধার করুন
বাল্বটি নিরাপদে ইনস্টল হয়ে গেলে, ফিক্সচারে বিদ্যুৎ পুনরুদ্ধার করুন। - ধাপ 6: পরীক্ষা
সঠিকভাবে কাজ করছে কিনা তা যাচাই করার জন্য আলোর সুইচটি চালু করুন।

অপারেটিং নির্দেশাবলী
The Philips 7388 halogen bulb operates immediately upon receiving power. No special operating procedures are required beyond turning the fixture's power switch on or off.
- ডিমিং: If used with a compatible dimmer switch, the brightness of the bulb can be adjusted. Ensure the dimmer is rated for halogen or incandescent loads and matches the bulb's voltage এবং ওয়াটtage.
- তাপ আউটপুট: Halogen bulbs produce heat. Ensure adequate ventilation around the fixture to prevent overheating.
রক্ষণাবেক্ষণ
Minimal maintenance is required for the Philips 7388 halogen bulb.
- পরিষ্কার করা: If the bulb becomes dusty, ensure the power is off and the bulb is cool. Gently wipe the glass with a soft, dry, lint-free cloth. Do not use liquid cleaners directly on the bulb.
- প্রতিস্থাপন: When the bulb reaches the end of its life, replace it following the "Setup and Installation" steps. Always use a bulb with the same specifications (20W, 6V, G4 base) to ensure compatibility and safety.
সমস্যা সমাধান
If your Philips 7388 bulb is not functioning as expected, consider the following:
- বাল্ব আলো নয়:
- ফিক্সচারের পাওয়ার সাপ্লাই চালু আছে কিনা তা পরীক্ষা করুন।
- Ensure the bulb is correctly seated in the G4 socket.
- Inspect the bulb for any visible damage or a broken filament. If damaged, replace the bulb.
- Test the fixture with a known working bulb to rule out a fixture issue.
- বাল্ব ফ্লিকারিং:
- Ensure the bulb is fully inserted into the socket.
- Check for loose connections in the fixture or wiring.
- If using a dimmer, ensure it is compatible with halogen bulbs and not overloaded.
- Short Bulb Life:
- সঠিক ভলিউম যাচাই করুনtage (6V) is being supplied to the bulb. Overvoltage can significantly reduce bulb life.
- Ensure the bulb is not being touched with bare hands during installation, as skin oils can cause premature failure.
- Check for excessive vibration or heat in the fixture, which can shorten bulb life.
স্পেসিফিকেশন
Key technical specifications for the Philips 7388 Halogen Bulb:
| বৈশিষ্ট্য | স্পেসিফিকেশন |
|---|---|
| ব্র্যান্ড | ফিলিপস লাইটিং |
| মডেল নম্বর | 7388 |
| হালকা প্রকার | হ্যালোজেন |
| ওয়াটtage | 20 ওয়াট |
| ভলিউমtage | 6 ভোল্ট |
| আলোকিত প্রবাহ | 460 - 475 lm (typical) |
| Socket/Base | G4 |
| রঙের তাপমাত্রা | 3200 - 3350 Kelvin (Warm White) |
| বাল্ব আকৃতির আকার | JC |
| কালার রেন্ডারিং ইনডেক্স (CRI) | 100 |
| উপাদান | Copper (pins) |
| পণ্যের মাত্রা | 0.35"W x 1.21"H (approx.) |
| ইনডোর/আউটডোর ব্যবহার | ইনডোর |

ওয়্যারেন্টি এবং সমর্থন
For warranty information or technical support regarding your Philips 7388 Halogen Bulb, please refer to the official Philips Lighting webসাইটে যান অথবা সরাসরি তাদের গ্রাহক পরিষেবার সাথে যোগাযোগ করুন। ক্রয়ের প্রমাণ হিসেবে আপনার ক্রয়ের রসিদটি রাখুন।
আরও তথ্যের জন্য আপনি ফিলিপস স্টোরটি দেখতে পারেন: অ্যামাজনে ফিলিপস স্টোর





