লেভিটন ওয়েটগার্ড ১৫-Amp, 250-Volt Industrial Grade Locking Plug

1. পণ্য শেষview

The Leviton Wetguard 15-Amp, 250-Volt Industrial Grade Locking Plug (Model 24W49) is a robust wiring device designed for demanding industrial environments. This plug features a polarized, grounding, L6-15P configuration with 3 wires, rated for 250V AC and 15 Amps. It is constructed from EPTR rubber material in a yellow color, ensuring water-tight performance and resistance to various harsh conditions. The Wetguard line meets IP67 and NEMA ratings for water ingress protection, offering superior durability and reliability.

Figure 1: Leviton Wetguard 15-Amp, 250-Volt Industrial Grade Locking Plug (Model 24W49)

2. মূল বৈশিষ্ট্য

• Industrial Grade Construction: Built to withstand harsh industrial environments.
• Watertight and Dust-tight: Meets IP67 and NEMA ratings for protection against water and dust ingress.
• টেকসই উপাদান: Made from EPTR rubber, resistant to water, acids, alkalis, lubricants, cleaners, and solvents.
• জারা প্রতিরোধের: Blades, contacts, terminal screws, and wiring clamps are electroless nickel-coated brass.
• সহজ ওয়্যারিং: Deep wire wells in the wiring module facilitate easier wiring.
• চাক্ষুষ পরিদর্শন: Clear housing aids in inspecting for proper wire insertion and connection.
• নিরাপদ সংযোগ: Patented compression nut and strain relief system ensure integrity of both the watertight seal and electrical connection.
• কনফিগারেশন: L6-15P, 2-pole, 3-wire grounding.
• সার্টিফিকেশন: UL 498, CSA C22.2, NOM 057 approved.

3. স্পেসিফিকেশন

4. নিরাপত্তা তথ্য

Always follow local electrical codes and regulations when installing or servicing electrical devices. Improper installation or use can result in serious injury or death. Disconnect power at the circuit breaker or fuse box before working on any electrical wiring.

• Ensure the power supply is OFF before installation or maintenance.
• Use appropriate personal protective equipment (PPE) such as safety glasses and insulated gloves.
• Verify correct wiring polarity and grounding connections.
• নির্দিষ্ট ভলিউম অতিক্রম করবেন নাtage এবং amperage ratings of the device.
• Keep the device clean and free from debris to maintain its watertight integrity.
• If the device shows signs of damage, discontinue use and replace it immediately.

5. ইনস্টলেশন

This section outlines the general steps for wiring the Leviton Wetguard Locking Plug. For detailed wiring diagrams and specific instructions, refer to the packaging or consult a qualified electrician.

1. কেবল প্রস্তুত করুন: Strip the outer jacket of the cable to the appropriate length, exposing the insulated conductors. Strip the insulation from each conductor.
2. Disassemble the Plug: Unscrew the compression nut and separate the plug housing components.
3. কেবল ঢোকান: Feed the prepared cable through the compression nut and into the plug housing.
4. তারের সংযোগ: Connect the conductors to the appropriate terminal screws. The clear housing allows for visual verification of proper wire insertion. Ensure all connections are tight and secure.
5. Assemble the Plug: Reassemble the plug housing, ensuring the internal components are correctly aligned. Tighten the compression nut to create a watertight seal and engage the strain relief system.
6. যাচাই করুন: Double-check all connections and ensure the plug is securely assembled before restoring power.

6. অপারেশন

The Leviton Wetguard Locking Plug is designed for secure and reliable electrical connections in wet or dusty environments. To operate:

1. সংযোগ করুন: Align the blades of the locking plug with the corresponding slots on a compatible locking receptacle.
2. লক টুইস্ট: Insert the plug fully and twist it clockwise until it locks into place. This action creates a secure mechanical and electrical connection, preventing accidental disconnection.
3. সংযোগ বিচ্ছিন্ন করুন: To disconnect, twist the plug counter-clockwise to unlock, then pull it straight out from the receptacle.

The watertight design ensures safe operation even when exposed to moisture, provided the connection is properly mated and sealed.

7. রক্ষণাবেক্ষণ

Regular maintenance helps ensure the longevity and safe operation of your Leviton Wetguard Locking Plug.

• নির্ধারিত সময়ের পরিদর্শন: Visually inspect the plug and cable for any signs of wear, cuts, cracks, or discoloration. Check for loose connections or corrosion on the blades.
• পরিষ্কার করা: Clean the exterior of the plug with a damp cloth. Avoid using harsh chemicals or abrasive cleaners that could damage the rubber material. Ensure the plug is dry before use.
• সঞ্চয়স্থান: When not in use, store the plug in a clean, dry environment to prevent damage and prolong its lifespan.
• সীল অখণ্ডতা: Periodically check the integrity of the compression nut and strain relief system to ensure the watertight seal is maintained.

8. সমস্যা সমাধান

If you encounter issues with your Leviton Wetguard Locking Plug, consider the following common troubleshooting steps:

• ক্ষমতা নেই:
  • Check the power source (circuit breaker, fuse).
  • নিশ্চিত করুন যে প্লাগটি সম্পূর্ণরূপে ঢোকানো হয়েছে এবং রিসেপ্ট্যাকলে লক করা আছে।
  • ক্ষতির জন্য তারের পরিদর্শন করুন।
• আলগা সংযোগ:
  • Ensure the plug is twisted and locked securely.
  • If the internal wiring feels loose, disconnect power and re-check the terminal screw connections as per installation instructions.
• পানির প্রবেশপথ:
  • Verify that the compression nut is tightly secured.
  • Inspect the rubber housing for any cracks or damage that could compromise the seal.

If the problem persists after attempting these steps, contact Leviton customer support or a qualified electrician.

9. Related Product Information (Video)

নিম্নলিখিত ভিডিওটি একটি ওভার প্রদান করেview of the Leviton Wetguard line of watertight wiring devices, showcasing their features and applications in various industrial environments. While the video may feature different models within the Wetguard series, the core principles of durability, watertight sealing, and robust construction apply to the 24W49 locking plug.

10. ওয়্যারেন্টি এবং সমর্থন

The Leviton Wetguard 15-Amp, 250-Volt Industrial Grade Locking Plug (Model 24W49) is backed by a manufacturer's warranty. For specific warranty details, terms, and conditions, please refer to the product packaging or visit the official Leviton webসাইট

For technical assistance, product inquiries, or support, please contact Leviton Customer Service:

• Webসাইট: www.leviton.com
• গ্রাহক সেবা: পড়ুন webআঞ্চলিক যোগাযোগের তথ্যের জন্য সাইট।