1. ভূমিকা
This manual provides essential information for the proper use, installation, and maintenance of the Connect 31747 Common Rail Copper Injector Washers. These washers are designed for sealing common rail diesel injectors, ensuring a secure and leak-free connection within the fuel system. Adhering to these instructions will help ensure optimal performance and longevity of the product.
Image 1.1: A pack of 50 Connect 31747 Common Rail Copper Injector Washers. These washers are circular, made of copper, and are essential for sealing diesel injectors.
2. সেটআপ এবং ইনস্টলেশন
Proper installation of injector washers is critical for preventing fuel leaks and maintaining engine performance. Always ensure the engine is cool before beginning any work on the fuel system.
- নিরাপত্তা প্রথম: Disconnect the vehicle's battery and relieve any fuel system pressure before starting. Wear appropriate personal protective equipment, including gloves and eye protection.
- পরিচ্ছন্নতা: Thoroughly clean the injector bore and the injector tip to remove any carbon deposits, old washer residue, or debris. A clean surface is essential for a proper seal.
- ওয়াশিং মেশিন স্থাপন: Carefully place a new Connect 31747 copper injector washer onto the injector tip. Ensure it sits flat and is correctly oriented. Do not reuse old washers.
- Injector Reinstallation: Reinstall the injector into its bore, ensuring it seats correctly. Follow the vehicle manufacturer's torque specifications for tightening the injector retaining bolt or clamp. Overtightening or undertightening can lead to leaks or damage.
- সিস্টেম চেক: After installation, reconnect the battery and prime the fuel system according to the vehicle manufacturer's instructions. Inspect for any fuel leaks before starting the engine.
৪. পরিচালনা সংক্রান্ত বিবেচনা
Once installed, the Connect 31747 copper injector washers are designed to provide a reliable seal under normal operating conditions. No specific operational steps are required for the washers themselves, as their function is passive sealing.
- ইঞ্জিনের পারফরম্যান্স: A properly sealed injector system contributes to efficient fuel combustion and optimal engine performance.
- নিয়মিত পরিদর্শন: Periodically check around the injectors for any signs of fuel leakage or exhaust gas blow-by, which could indicate a compromised washer seal.
4. রক্ষণাবেক্ষণ
The Connect 31747 copper injector washers are consumable components and do not require maintenance themselves. Their primary maintenance consideration is replacement.
- প্রতিস্থাপনের সময়সূচী: It is highly recommended to replace injector washers every time an injector is removed for service, inspection, or replacement. Copper washers deform to create a seal and are not designed for reuse.
- সঞ্চয়স্থান: Store unused washers in a clean, dry environment to prevent contamination or damage.
5. সমস্যা সমাধান
Issues related to injector washers typically manifest as leaks or poor engine performance. This section outlines common problems and their potential solutions.
| সমস্যা | সম্ভাব্য কারণ | সমাধান |
|---|---|---|
| Fuel Leakage around Injector | Improperly seated washer, damaged washer, reused washer, incorrect torque. | Remove injector, clean bore, install new washer correctly, re-torque to specification. |
| Exhaust Gas Blow-by (soot around injector) | Washer not sealing combustion gases, often due to improper installation or damage. | Remove injector, clean bore and injector tip thoroughly, install new washer, ensure correct seating and torque. |
| Rough Engine Idle / Misfire | While not directly caused by the washer, a severe leak can affect fuel pressure and combustion. | Check for leaks as described above. If no leaks, investigate other fuel system or engine components. |
6. স্পেসিফিকেশন
Detailed specifications for the Connect 31747 Common Rail Copper Injector Washer.
| বৈশিষ্ট্য | বিস্তারিত |
|---|---|
| মডেল নম্বর | 31747 |
| উপাদান | তামা |
| বাইরের ব্যাস | 14.6 মিমি |
| ভিতরের ব্যাস | 7.5 মিমি |
| পুরুত্ব | 3.0 মিমি |
| প্রতি প্যাকের পরিমাণ | 50 টুকরা |
| আইটেম ওজন | 6 ounces (approx. for the pack) |
| পণ্যের মাত্রা | ১৪.৮৮ x ১৩.৯৪ x ৩.৭ ইঞ্চি (প্যাকেজিং) |
| প্রস্তুতকারক | দ্য টুল কানেকশন লিমিটেড |
| জিটিআইএন | 05018341317478 |
7. ওয়ারেন্টি তথ্য
Connect products are manufactured to high standards. For specific warranty details regarding the Connect 31747 Common Rail Copper Injector Washers, please refer to the official Connect website or contact your point of purchase. Warranty typically covers manufacturing defects.
8. সমর্থন
For technical assistance, product inquiries, or support, please contact Connect customer service through their official website or the retailer from whom the product was purchased. When contacting support, please have the model number (31747) and any relevant purchase information available.
