Finder 140182300000PAS Multifunction Timer/Staircase Relay User Manual

1. ভূমিকা

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Finder 140182300000PAS Multifunction Timer/Staircase Relay. Please read this manual carefully before installation and use to ensure proper function and safety.

2. নিরাপত্তা তথ্য

WARNING: Electrical shock hazard. Installation and maintenance should only be performed by qualified personnel in accordance with all local and national electrical codes.

• ডিভাইসটি ইনস্টল বা সার্ভিস করার আগে সর্বদা বিদ্যুৎ সংযোগ বিচ্ছিন্ন করুন।
• Ensure the device is installed in a suitable enclosure to protect against environmental factors.
• Verify correct wiring connections to prevent damage to the device or connected equipment.
• নির্দিষ্ট ভলিউম অতিক্রম করবেন নাtagই এবং বর্তমান রেটিং।

3. পণ্য শেষview

The Finder 140182300000PAS is a versatile multifunction timer and staircase relay designed for various electrical control applications. It features a 230V operating voltage, a 1 NO (normally open) contact, and a 16A current rating. Its compact design allows for easy integration into electrical panels.

চিত্র 1: সামনে view of the Finder 140182300000PAS Multifunction Timer/Staircase Relay. This image shows the device's casing, terminals, and the adjustable timer dial.

চিত্র 2: Example application of the Finder 140182300000PAS controlling staircase lighting. The relay is shown in an inset, demonstrating its use in a typical residential or commercial setting.

চিত্র 3: Another application example, showing the Finder 140182300000PAS managing lighting for a modern spiral staircase. This highlights the device's suitability for various architectural lighting designs.

4. সেটআপ এবং ইনস্টলেশন

4.1 ভৌত মাত্রা

Refer to the dimensional drawing for precise measurements to ensure proper fit and mounting.

চিত্র 4: Dimensional drawing for the Type 14.01 relay, showing height, width, and depth in millimeters. This diagram is crucial for planning installation space.

4.2 তারের ডায়াগ্রাম

The Finder 140182300000PAS supports both 3-wire and 4-wire connection types. Select the appropriate diagram for your installation.

চিত্র 5: Wiring Diagram Type 14.01 for a 3-wire connection. This diagram illustrates how to connect the relay to the power supply and load using a 3-wire configuration, typically for staircase lighting with a common neutral.

চিত্র 6: Wiring Diagram Type 14.01 for a 4-wire connection. This diagram shows the connections for a 4-wire setup, which might be used in systems requiring separate control wires for the relay and the load.

5. অপারেটিং নির্দেশাবলী

5.1 Timer Adjustment

The device features an adjustable timer dial on its front face. To set the desired timing duration:

1. Locate the orange dial labeled 'T(min)' on the front of the relay.
2. Rotate the dial to align the indicator with the desired time setting (e.g., 5, 10, 15, 20 minutes).
3. The selected time will determine how long the connected load remains active after activation.

5.2 Multifunction Operation

The Finder 140182300000PAS operates as both a staircase timer and a multifunction relay. When activated (e.g., by a push-button switch), the relay will close its contact, powering the connected load for the duration set on the timer. It can be used for applications such as:

• Staircase lighting control.
• Timed ventilation systems.
• General purpose timed switching.

6. রক্ষণাবেক্ষণ

The Finder 140182300000PAS is designed for long-term, maintenance-free operation. However, periodic checks are recommended:

• Ensure all wiring connections remain secure.
• ডিভাইসটিকে ধুলো এবং ধ্বংসাবশেষ থেকে মুক্ত রাখুন।
• Inspect for any signs of physical damage or overheating.
• If the device is exposed to harsh environments, consider more frequent inspections.

WARNING: Always disconnect power before performing any maintenance or inspection.

7. সমস্যা সমাধান

যদি ডিভাইসটি প্রত্যাশা অনুযায়ী কাজ না করে, তাহলে নিম্নলিখিত বিষয়গুলি বিবেচনা করুন:

• No power to the load: Check the main power supply, circuit breaker, and all wiring connections. Ensure the device is receiving 230V.
• Timer not activating: Verify the input signal (e.g., from the push-button switch) is correctly connected and functioning.
• Incorrect timing duration: Re-check the setting on the 'T(min)' dial.
• ডিভাইস অতিরিক্ত গরম হওয়া: Ensure the load current does not exceed 16A. Check for proper ventilation around the device.

If issues persist after checking these points, consult a qualified electrician or contact Finder customer support.

8. স্পেসিফিকেশন

8.1 সার্টিফিকেশন

The product complies with various international standards.

চিত্র 7: Product certifications, including CE, UKCA, EAC, and Q-Mark, indicating compliance with European, UK, Eurasian, and quality standards respectively.

9. ওয়্যারেন্টি এবং সমর্থন

For warranty information and technical support, please refer to the official Finder webসাইটে যান অথবা আপনার স্থানীয় পরিবেশকের সাথে যোগাযোগ করুন। ক্রয়ের প্রমাণ হিসেবে আপনার ক্রয়ের রসিদটি রাখুন।