Bosch Professional Tripod BT 150 নির্দেশিকা ম্যানুয়াল

ভূমিকা

This manual provides essential information for the safe and efficient use of your Bosch Professional Tripod BT 150. Designed for stability and precision, this aluminum tripod is compatible with various Bosch lasers and levels featuring a 1/4-inch thread. Please read these instructions carefully before initial operation and keep them for future reference.

1. সেটআপ

৪.১ ট্রাইপড খোলা

1. ট্রাইপডটি একটি সমতল, স্থিতিশীল পৃষ্ঠে রাখুন।
2. Gently spread the tripod legs outwards until they are fully extended and stable.
3. Ensure the leg braces are securely locked into position to prevent accidental collapse.

Image: Bosch BT 150 Tripod in its unfolded state, ready for use.

৩.২ ট্রাইপডের উচ্চতা সামঞ্জস্য করা

1. পা এক্সটেনশন: cl আনলক করুনamps on each leg section. Extend the legs to the desired height (between 55 cm and 157 cm). Securely close the clamps to lock the legs in place.
2. Center Column Adjustment: Use the crank handle to precisely raise or lower the center column for fine height adjustments.

Image: Hands adjusting the leg clamps to extend the tripod legs.

Image: Hands operating the crank handle to adjust the height of the tripod's center column.

1.3 Mounting a Device

1. The tripod head features a 1/4-inch mounting screw.
2. Attach your laser or level securely to the mounting screw on the tripod head. Ensure it is tightened firmly to prevent movement.

Image: A hand securing a device onto the 1/4-inch mounting screw of the tripod head.

2. Operating the Tripod

2.1 Leveling the Device

• The tripod head includes a circular vial (bubble level) for accurate leveling.
• Adjust the tripod legs and/or the center column until the bubble in the circular vial is centered, indicating a level surface for your laser or level.

Image: Bosch BT 150 Tripod with a Bosch laser level mounted, demonstrating its use.

2.2 Pan and Tilt Adjustments

• Use the pan handle to smoothly rotate the mounted device horizontally (panning).
• Loosen the tilt knob to adjust the vertical angle of the device (tilting). Tighten the knob to secure the desired angle.

3. রক্ষণাবেক্ষণ

• পরিষ্কার করা: Wipe the tripod with a soft, damp cloth after each use to remove dust and debris. Avoid using harsh chemicals or abrasive cleaners.
• সঞ্চয়স্থান: Store the tripod in a dry, clean environment. Collapse the legs and center column fully for compact storage.
• পরিদর্শন: Regularly inspect all clamps, screws, and moving parts for wear or damage. Ensure all components are functioning correctly before use.

4. সমস্যা সমাধান

4.1 Center Column Crank Not Adjusting Height

If the crank handle turns but the center column does not adjust, the internal gear may be stripped. This often occurs if the thumb screw (which locks the telescoping pole) is tightened before attempting to adjust the height with the crank. Always loosen the thumb screw before using the crank for height adjustment. If the gear is stripped, replacement parts may not be readily available, and manual adjustment of the pole might be necessary.

5. স্পেসিফিকেশন

6. ওয়্যারেন্টি এবং সমর্থন

The Bosch Professional Tripod BT 150 comes with a 3 বছরের ওয়ারেন্টি if registered. For detailed warranty information, product support, or service inquiries, please visit the official Bosch webসাইট অথবা Bosch গ্রাহক পরিষেবার সাথে যোগাযোগ করুন।

For additional information and product registration, please refer to the official Bosch webসাইট: www.bosch-professional.com