ভূমিকা
This manual provides comprehensive instructions for the installation, operation, and maintenance of the Hunter 99179 Original Ceiling Fan Remote Control and Canopy Kit. This kit is specifically designed to enhance the functionality of Hunter "Original" series ceiling fans by adding remote control capabilities for fan speeds and lighting.
The kit includes a remote control unit and a canopy designed to house the receiver. It integrates with your existing two-wire fan setup, offering convenient control over three fan speeds and the fan's light fixture.
গুরুত্বপূর্ণ নিরাপত্তা তথ্য
- বৈদ্যুতিক নিরাপত্তা: Always disconnect power at the circuit breaker or fuse box before attempting any installation, maintenance, or repair. Failure to do so can result in serious injury or death.
- সামঞ্জস্যতা: This kit is designed for use শুধুমাত্র with Hunter "Original" series ceiling fans. It is not compatible with other fan models or brands.
- Downrod Requirement: Installation requires a downrod of 12 inches or longer (sold separately). The receiver unit is designed to fit within the canopy, which necessitates sufficient space provided by a longer downrod.
- পেশাদার ইনস্টলেশন: If you are unfamiliar with electrical wiring or ceiling fan installation, it is recommended to consult a qualified electrician.
- স্থানীয় কোড: Ensure all installation procedures comply with local electrical codes and ordinances.
- পণ্য অখণ্ডতা: Do not modify the product or use it for purposes other than its intended use.
প্যাকেজ বিষয়বস্তু
ইনস্টলেশন শুরু করার আগে সমস্ত উপাদান উপস্থিত আছে কিনা তা যাচাই করুন:
- রিমোট কন্ট্রোল ইউনিট
- রিমোট রিসিভার
- Canopy (for receiver housing)
- Mounting Hardware (screws, wire nuts, etc. - specific items may vary)
Image: A Hunter ceiling fan, representative of the type of fan compatible with the 99179 remote and canopy kit.
সেটআপ এবং ইনস্টলেশন
Follow these steps carefully to install your Hunter 99179 Remote Control and Canopy Kit:
- বিদ্যুৎ সংযোগ বিচ্ছিন্ন: Before starting, turn off the electrical power to your ceiling fan at the main circuit breaker or fuse box.
- অ্যাক্সেস ওয়্যারিং: Carefully lower the existing canopy from your Hunter Original ceiling fan to expose the wiring connections.
- Remove Old Receiver (if applicable): If an old receiver is present, disconnect its wiring and remove it.
- Install New Receiver: Connect the new remote receiver's wires to the corresponding fan and household wires. Ensure all connections are secure using wire nuts. The receiver is designed to fit within the new canopy.
- Position Canopy: Carefully tuck the wired receiver into the new canopy. Ensure no wires are pinched.
- নিরাপদ ছাউনি: Mount the new canopy securely to the fan's mounting bracket. Confirm that the downrod is at least 12 inches long to accommodate the receiver within the canopy.
- পুনরুদ্ধার শক্তি: Once installation is complete and all connections are secure, restore power to the ceiling fan at the circuit breaker.
- রিমোট জোড়া: Follow the instructions provided with the remote control unit to pair it with the newly installed receiver. This typically involves pressing a button on the remote within a short time after restoring power.
দ্রষ্টব্য: The new canopy is designed to accommodate the receiver. Some older Hunter Original fan mounting plates or downrods may not be compatible with the new canopy's dimensions. Verify fit before final installation.
অপারেটিং নির্দেশাবলী
Your Hunter 99179 remote control provides convenient operation of your ceiling fan and light:
- ফ্যানের গতি নিয়ন্ত্রণ: Use the designated buttons on the remote to cycle through three fan speeds (Low, Medium, High) or to turn the fan off.
- আলো নিয়ন্ত্রণ: Use the light button to turn the fan light on or off. Some remotes may also support dimming functions if your fan and light kit are compatible.
- ব্যাটারি প্রতিস্থাপন: If the remote control stops responding, replace the batteries. Refer to the remote's specific instructions for battery type and replacement procedure.
রক্ষণাবেক্ষণ
To ensure optimal performance and longevity of your Hunter 99179 kit:
- পরিষ্কার করা: Periodically wipe the remote control and canopy with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- ব্যাটারি চেক: Replace remote control batteries as needed to maintain reliable operation.
- তারের পরিদর্শন: Annually, or if issues arise, ensure all electrical connections within the canopy are secure and free from corrosion. Always disconnect power before inspection.
সমস্যা সমাধান
If you encounter issues with your remote control and canopy kit, refer to the following common solutions:
| সমস্যা | সম্ভাব্য কারণ | সমাধান |
|---|---|---|
| Remote not responding / Fan or light not working |
|
|
| Canopy does not fit / Receiver cannot be housed |
|
|
| অন্যান্য ডিভাইস থেকে হস্তক্ষেপ |
|
|
স্পেসিফিকেশন
- মডেল নম্বর: 99179
- প্রস্তুতকারক: হান্টার ফ্যান কোম্পানি
- পণ্যের মাত্রা: প্রায় 6 x 6 x 7 ইঞ্চি
- আইটেম ওজন: প্রায় 2.35 পাউন্ড
- ভলিউমtage: 120 ভোল্ট
- শক্তি উৎস: কর্ডেড-ইলেকট্রিক
- উপাদান: ধাতু
- সার্টিফিকেশন: ETL তালিকাভুক্ত
- ব্যবহার: Ceiling fan remote control and canopy accessory
- বিশেষ বৈশিষ্ট্য: Heavy Duty construction
- সামঞ্জস্যপূর্ণ ডিভাইস: Hunter "Original" series ceiling fans
ওয়ারেন্টি তথ্য
No specific warranty description is provided for the Hunter 99179 Remote Control and Canopy Kit in the product details. For warranty inquiries, please contact Hunter Fan Company directly or refer to the documentation included with your original Hunter "Original" ceiling fan.
কাস্টমার সাপোর্ট
For further assistance, technical support, or to inquire about parts, please visit the official Hunter Fan Company webসাইট বা তাদের গ্রাহক সেবা বিভাগের সাথে যোগাযোগ করুন।
হান্টার ফ্যান কোম্পানি Webসাইট: Visit the Hunter Store on Amazon
