TOPGREENER TSOS5-W In-Wall PIR Motion Sensor Light Switch Instruction Manual

1. ভূমিকা

This manual provides comprehensive instructions for the installation, operation, and maintenance of the TOPGREENER TSOS5-W In-Wall PIR Motion Sensor Light Switch. This device is designed to automatically control lighting, fans, and motors by detecting occupancy and vacancy in a room, offering both convenience and energy efficiency.

ইনস্টলেশনের আগে অনুগ্রহ করে এই ম্যানুয়ালটি ভালোভাবে পড়ুন এবং সঠিক কার্যকারিতা এবং নিরাপত্তা নিশ্চিত করতে ব্যবহার করুন।

2. নিরাপত্তা তথ্য

সতর্কতা: বৈদ্যুতিক শক ঝুঁকি.

Improper installation can result in serious injury or death. Always turn off power at the circuit breaker before beginning any electrical work. Consult a qualified electrician if you are unsure about any part of the installation process or if your wiring does not match the descriptions provided.

• This device requires a neutral wire for operation. Verify that a neutral wire is present in your electrical box before installation.
• This switch is for single-pole applications only. It is not compatible with 3-way or multi-way circuits.
• Do not exceed the maximum load ratings: 4 Amps, 500W.
• নিশ্চিত করুন যে সমস্ত তারের সংযোগগুলি সুরক্ষিত এবং সঠিকভাবে অন্তরকযুক্ত।
• শুধুমাত্র অভ্যন্তরীণ ব্যবহারের জন্য।

3. প্যাকেজ বিষয়বস্তু

প্যাকেজে সমস্ত আইটেম উপস্থিত আছে কিনা তা যাচাই করুন:

• TOPGREENER TSOS5-W Motion Sensor Light Switch
• ওয়্যার বাদাম
• নির্দেশিকা ম্যানুয়াল
• ওয়াল প্লেট

This image displays two TOPGREENER TSOS5-W in-wall PIR motion sensor light switches, each with a white wall plate. The switches feature a slider for OFF, AUTO, and ON modes, and a small dial for adjustments.

4. স্পেসিফিকেশন

5. ইনস্টলেশন

আপনি শুরু করার আগে: Turn OFF power at the circuit breaker or fuse box. Ensure the power is completely off before proceeding.

1. পাওয়ার বন্ধ করুন: আপনি যে সুইচটি প্রতিস্থাপন করছেন সেটি নিয়ন্ত্রণকারী সার্কিট ব্রেকারটি সনাক্ত করুন এবং এটি বন্ধ করুন। একটি ভলিউম ব্যবহার করে বিদ্যুৎ বন্ধ আছে কিনা তা যাচাই করুন।tagই পরীক্ষক।
2. পুরাতন সুইচটি সরান: Unscrew and carefully pull the old switch from the wall box. Disconnect the wires from the old switch.
3. তারগুলি সনাক্ত করুন: You should have the following wires in your electrical box:
   • Line Wire (Hot): Usually black, coming from the circuit breaker.
   • লোড ওয়্যার: Usually black, going to the light fixture or appliance.
   • নিরপেক্ষ তার: সাধারণত সাদা। This switch requires a neutral wire.
   • স্থল তারের: সাধারণত খালি তামা বা সবুজ।
4. নতুন সুইচ সংযুক্ত করুন: Use the provided wire nuts to connect the wires from the wall box to the corresponding wires on the TOPGREENER TSOS5-W switch. Refer to the wiring diagram below.
   • সংযোগ করুন লাইন wire from the wall box to the লাইন wire on the switch.
   • সংযোগ করুন লোড wire from the wall box to the লোড wire on the switch.
   • সংযোগ করুন নিরপেক্ষ wire from the wall box to the নিরপেক্ষ wire on the switch.
   • সংযোগ করুন স্থল wire from the wall box to the স্থল wire on the switch.
5. মাউন্ট সুইচ: Carefully push the wired switch back into the wall box. Secure it with the mounting screws. Attach the wall plate.
6. পুনরুদ্ধার শক্তি: সার্কিট ব্রেকারে বিদ্যুৎ আবার চালু করুন।

An internal diagram of the TOPGREENER motion sensor switch, highlighting its key components and features such as the precision PIR sensor, customizable controls, daylight detection, fault tolerance, and fire-resistant construction. This image also implies the wiring connections.

6. অপারেশন

The TOPGREENER TSOS5-W switch features a slider control with three main modes: OFF, AUTO, and ON.

• বন্ধ মোড: When the slider is in the OFF position, the connected lights or appliance will remain off, regardless of motion detection. This acts as a manual override to keep the load off.
• AUTO Mode (Occupancy Sensor): When the slider is in the AUTO position, the switch functions as an occupancy sensor. It will automatically turn the lights/appliance ON when motion is detected and turn them OFF after a set time delay when no motion is detected.
• চালু মোড: When the slider is in the ON position, the connected lights or appliance will remain on continuously, regardless of motion detection. This acts as a manual override to keep the load on.

This image demonstrates the manual ON/OFF override feature of the TOPGREENER motion sensor switch, allowing users to switch between OFF, AUTO (sensor-controlled), and ON modes as needed.

The TOPGREENER motion sensor switch is shown in the 'OFF' position, indicating that the lights will remain off regardless of motion, suitable for situations where manual control is preferred.

7. সেটিংস এবং সামঞ্জস্য

The sensor switch includes three adjustable dials located behind the wall plate (or sometimes accessible via a small cover) to customize its behavior:

• Time Dial (Delay Time): This dial adjusts how long the lights/appliance remain ON after the last detected motion. Settings include 15 seconds (test mode), 10 minutes, 20 minutes, and 30 minutes. The 15-second test mode is useful for verifying detection and wiring during installation.
• Range Dial (Detection Sensitivity): This dial controls the sensor's detection coverage area and sensitivity. It can be adjusted from 30% to 100%. A higher setting provides broader coverage.
• Light Dial (Ambient Light Sensitivity): This dial sets the required ambient light level for the sensor to activate. Settings typically range from 1 to 4. Positions 1-2 are for darker locations, meaning the lights will turn on even if there is some ambient light. Positions 3-4 are for brighter locations, meaning the lights will only turn on when the room is quite dark.

This image highlights the adjustable dials on the TOPGREENER motion sensor switch: the Time Dial for setting the delay before reset, the Range Dial for detection sensitivity, and the Light Dial for ambient light activation levels.

একটি বিস্তারিত view of the TOPGREENER motion sensor switch's adjustment knobs, illustrating the specific settings for time delay (15 seconds, 10, 20, 30 minutes), detection range (positions 1-4), and ambient light sensitivity (positions 1-4).

8. সমস্যা সমাধান

If you encounter issues with your TOPGREENER TSOS5-W motion sensor switch, refer to the following common problems and solutions:

• লাইট চালু হয় না:
  • Ensure power is ON at the circuit breaker.
  • Check all wiring connections for security and proper alignment (Line, Load, Neutral, Ground).
  • Verify the switch is in AUTO or ON mode.
  • Adjust the Range Dial to increase sensitivity.
  • Adjust the Light Dial to a lower setting if the room is dark but the lights are not activating.
  • Test the light bulb or fixture to ensure it is working correctly.
• Lights stay ON:
  • Ensure the switch is in AUTO mode, not ON mode.
  • Check for constant motion within the sensor's field of view.
  • Adjust the Time Dial to a shorter delay.
  • Adjust the Range Dial to decrease sensitivity if the sensor is detecting motion outside the desired area.
• Lights turn ON/OFF too frequently:
  • Adjust the Time Dial to a longer delay.
  • Adjust the Range Dial to decrease sensitivity.
  • Ensure the sensor is not obstructed or exposed to drafts that might trigger it.

If the device does not work after installation or troubleshooting, please contact TOPGREENER customer support for assistance.

9. রক্ষণাবেক্ষণ

The TOPGREENER TSOS5-W motion sensor switch requires minimal maintenance.

• পরিষ্কার করা: To clean the switch and wall plate, gently wipe with a soft, damp কাপড়। ঘষিয়া তুলিয়া ফেলিতে সক্ষম ক্লিনার, দ্রাবক, বা কঠোর রাসায়নিক ব্যবহার করবেন না, কারণ এগুলি ফিনিশ বা অভ্যন্তরীণ উপাদানগুলির ক্ষতি করতে পারে।
• পরিদর্শন: Periodically inspect the switch for any visible damage or loose connections. If any issues are found, turn off power at the circuit breaker and address them or contact a qualified electrician.

10. ওয়্যারেন্টি এবং সমর্থন

TOPGREENER products are designed for reliability and performance. While specific warranty details are not provided in this manual, TOPGREENER typically offers a limited warranty on its products. Please refer to the product packaging or the official TOPGREENER webসর্বশেষ ওয়ারেন্টি তথ্যের জন্য সাইট।

For technical support, troubleshooting assistance, or warranty claims, please contact TOPGREENER customer service. Contact information can usually be found on the product packaging or the TOPGREENER official webসাইট