Godox X1R-S 2.4G TTL Wireless Flash Receiver for Sony Cameras

1. ভূমিকা

The Godox X1R-S is a 2.4G wireless flash receiver designed for Sony DSLR cameras, offering TTL (Through-The-Lens) autoflash compatibility and high-speed sync capabilities. This receiver integrates seamlessly into the Godox wireless X system, allowing for remote control of compatible flashes and studio strobes. This manual provides detailed instructions for setting up, operating, and maintaining your X1R-S receiver.

2. পণ্য শেষview

মূল বৈশিষ্ট্য:

• সামঞ্জস্যতা: Designed for Sony DSLR cameras, supporting TTL Autoflash.
• ওয়্যারলেস সিস্টেম: Built-in 2.4G wireless transmission for reliable communication up to 100 meters.
• ফ্ল্যাশ মোড: Supports TTL Autoflash, Manual Flash, and Multi-Flash modes.
• Sync Functions: 1/8000s High-Speed Sync (HSS), Flash Exposure Compensation (FEC), Flash Exposure Lock (FEL), Modeling Flash.
• নিয়ন্ত্রণ: Wireless remote control and grouping system with 5 groups (A/B/C/D/E) in GR mode and 3 groups (A/B/C) in Ratio mode, across 32 channels.
• শাটার রিলিজ: Functions as a wireless shutter release via its 2.5mm sync port.
• প্রদর্শন: Wide LCD panel with backlight for easy operation.
• শক্তি: Uses 2x AA batteries.
• ফার্মওয়্যার: ফার্মওয়্যার আপগ্রেডের জন্য মাইক্রো ইউএসবি পোর্ট।

উপাদান সনাক্তকরণ:

চিত্র 1: সামনে view of the Godox X1R-S receiver, showing the hot shoe mount and 'TEST' button.

চিত্র 2: শীর্ষ view of the Godox X1R-S receiver, highlighting the LCD screen and channel/group buttons.

চিত্র 3: পার্শ্ব view of the Godox X1R-S receiver, showing the Micro USB port and 2.5mm sync port.

3. সেটআপ

3.1 ব্যাটারি ইনস্টলেশন

1. Slide open the battery compartment cover located on the side of the receiver.
2. সঠিক পোলারিটি (+/-) নিশ্চিত করে দুটি (2) AA ব্যাটারি ঢোকান।
3. ব্যাটারি কম্পার্টমেন্ট কভার নিরাপদে বন্ধ করুন.

Figure 4: The battery compartment of the X1R-S receiver, showing two AA batteries being inserted.

৩.২ রিসিভার মাউন্ট করা

1. Attach the X1R-S receiver to the hot shoe of your Sony camera.
2. Secure the receiver by tightening the locking wheel.
3. Mount your compatible flash unit onto the hot shoe of the X1R-S receiver.

চিত্র 5: নীচে view of the X1R-S receiver, showing the hot shoe mount for camera attachment.

3.3 Connecting to Studio Strobes/Other Devices

For studio strobes or other devices requiring a sync connection, use the provided 2.5mm sync cable. Connect one end to the 2.5mm sync port on the X1R-S receiver and the other end to the sync port of your studio strobe or device.

Figure 6: The X1R-S receiver shown with various sync cables for connecting to different flash units.

3.4 Channel and Group Settings

Ensure the channel and group settings on your X1R-S receiver match those on your Godox X-series transmitter (sold separately). This ensures proper communication between the units.

• Use the 'CH' button to select the desired channel (1-32).
• Use the 'GR' button to select the desired group (A/B/C/D/E).

4. অপারেটিং নির্দেশাবলী

4.1 পাওয়ার অন/অফ

Slide the ON/OFF switch located on the side of the receiver to power it on or off.

৪.৫ টেস্ট ফ্ল্যাশ

Press the 'TEST' button on the receiver to manually trigger the connected flash unit. The 'STATUS' indicator will light up to confirm the flash has fired.

4.3 Wireless Flash Control

Once the receiver is properly set up and paired with a compatible Godox X-series transmitter, the flash connected to the X1R-S will fire in sync with your camera's shutter release, according to the settings configured on the transmitter. This includes TTL, Manual, Multi-flash, HSS, FEC, and FEL functions.

4.4 Wireless Shutter Release

The X1R-S receiver can also function as a wireless shutter release for your camera. Connect the receiver to your camera's shutter release port using an appropriate 2.5mm sync cable. The shutter release function is typically controlled via the transmitter.

4.5 LCD প্যানেল

The wide LCD panel displays current settings such as channel, group, flash mode, and battery status. The backlight can be toggled on/off for visibility in various lighting conditions.

5. রক্ষণাবেক্ষণ

5.1 ব্যাটারি প্রতিস্থাপন

Replace the AA batteries when the battery indicator on the LCD panel shows low power to ensure uninterrupted operation.

5.2 ফার্মওয়্যার আপগ্রেড

The X1R-S receiver features a Micro USB port for firmware upgrades. Visit the official Godox webসর্বোত্তম কর্মক্ষমতা এবং সামঞ্জস্য নিশ্চিত করার জন্য সর্বশেষ ফার্মওয়্যার এবং নির্দেশাবলীর জন্য সাইট।

6. সমস্যা সমাধান

• ফ্ল্যাশ জ্বলছে না:
  • Check if the receiver is powered on and has fresh batteries.
  • Ensure the channel and group settings on the receiver match the transmitter.
  • Verify that the flash unit is properly mounted and powered on.
  • Check the connection of the 2.5mm sync cable if using a studio strobe.
  • Test the flash manually using the 'TEST' button on the receiver.
• অসঙ্গতিপূর্ণ গুলিবর্ষণ:
  • Ensure the receiver and transmitter are within the effective operating range (up to 100m).
  • Check for potential interference from other 2.4G wireless devices. Try changing channels.
  • Verify battery levels in both the receiver and the connected flash unit.
• TTL/HSS not working:
  • Confirm that both your camera and flash unit support TTL/HSS.
  • Ensure the receiver is securely mounted on the camera's hot shoe and the flash is securely mounted on the receiver.
  • Check the settings on your transmitter to ensure TTL/HSS is enabled.

7. স্পেসিফিকেশন

৮. অফিসিয়াল পণ্য ভিডিও

Godox CT-16 Flash Trigger Kit Operation

Godox CT-16 Wireless Flash Trigger

Godox X3 Trigger Operation Tutorial

9. ওয়্যারেন্টি এবং সমর্থন

ওয়ারেন্টি তথ্য, প্রযুক্তিগত সহায়তা, বা পরিষেবা অনুসন্ধানের জন্য, অনুগ্রহ করে অফিসিয়াল গডক্স দেখুন। website or contact your authorized dealer. Specific warranty terms may vary by region and retailer.