Nilight ZH409 20-Inch 420W Triple Row LED Light Bar User Manual

1. ভূমিকা

This manual provides detailed instructions for the installation, operation, and maintenance of your Nilight ZH409 20-Inch 420W Triple Row LED Light Bar. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. নিরাপত্তা তথ্য

• যেকোনো বৈদ্যুতিক কাজ করার আগে সর্বদা গাড়ির ব্যাটারির সংযোগ বিচ্ছিন্ন করুন।
• শর্ট সার্কিট প্রতিরোধ করার জন্য নিশ্চিত করুন যে সমস্ত তারের সংযোগগুলি সুরক্ষিত এবং সঠিকভাবে অন্তরকযুক্ত।
• Mount the light bar securely to prevent it from dislodging during vehicle operation.
• Do not look directly into the light bar when it is illuminated, as it can cause eye strain or damage.
• Verify local regulations regarding auxiliary lighting before use on public roads.

3. প্যাকেজ বিষয়বস্তু

সমস্ত জিনিসপত্র উপস্থিত এবং ক্ষতিগ্রস্থ না হয়েছে তা নিশ্চিত করতে দয়া করে প্যাকেজটি পরীক্ষা করুন:

• 1 x Nilight ZH409 20-Inch LED Light Bar
• 1 x Heavy Duty Off-Road Wiring Harness
• মাউন্ট বন্ধনী এবং হার্ডওয়্যার

Image: Contents of the Nilight ZH409 package, including the LED light bar, wiring harness, and mounting accessories.

4. স্পেসিফিকেশন

মাত্রা

Image: Detailed dimensions of the 20-inch LED light bar and its mounting components.

5. সেটআপ এবং ইনস্টলেশন

The Nilight ZH409 LED Light Bar comes with an adjustable mounting bracket and a heavy-duty wiring harness for straightforward installation.

৪.১ লাইট বার মাউন্ট করা

1. Identify a suitable mounting location on your vehicle that provides clear light projection and secure attachment points.
2. Attach the adjustable mounting brackets to the light bar using the provided screws, washers, and nuts.
3. Position the light bar in the desired location and mark the drilling points for the brackets.
4. Drill pilot holes and securely fasten the light bar to the vehicle using appropriate hardware. The brackets allow for flexible adjustment of the light bar's angle.

Image: Illustration of the adjustable mounting bracket for flexible positioning.

5.2 Wiring the Light Bar

The included wiring harness simplifies the electrical connection. It typically includes a relay, an in-line fuse, and a toggle switch.

1. Connect the light bar's power connector to the corresponding connector on the wiring harness.
2. Connect the positive (+) wire from the harness to the positive terminal of your vehicle's battery.
3. Connect the negative (-) wire from the harness to the negative terminal of your vehicle's battery or a suitable ground point on the chassis.
4. Route the toggle switch to a convenient location within the vehicle's cabin. Ensure the wiring is secured and protected from heat, sharp edges, and moving parts.
5. The in-line blade fuse provides overcurrent protection. Ensure it is correctly installed in its water-resistant holder.

Image: General wiring diagram for the light bar and harness.

Image: The included toggle switch for controlling the light bar.

Image: The in-line blade fuse for circuit protection.

৪.৫ ইনস্টলেশন ভিডিও গাইড

Video: An official Nilight video demonstrating the installation process for the 20-inch LED light bar with wiring harness.

6. অপারেটিং নির্দেশাবলী

Once properly installed, operate the Nilight ZH409 LED Light Bar using the installed toggle switch. Press the switch to turn the light bar ON or OFF.

6.1 Beam Pattern

The light bar features a triple row flood spot combo beam pattern, providing both wide area illumination (flood) and focused long-distance light (spot) for comprehensive visibility.

Image: Representation of the light bar's wide and focused beam pattern.

6.2 Brightness Demonstration

Video: An official Nilight video demonstrating the brightness and beam pattern of the LED light bar in various scenarios.

7. রক্ষণাবেক্ষণ

• পরিষ্কার করা: Regularly clean the lens with a soft cloth and mild soap to maintain optimal light output. Avoid abrasive cleaners that could scratch the lens.
• পরিদর্শন: Periodically check all mounting hardware and electrical connections for tightness and corrosion. Tighten any loose fasteners.
• ওয়্যারিং: Inspect the wiring harness for any signs of wear, fraying, or damage. Replace damaged components immediately.
• জলরোধী: The light bar has an IP67 waterproof rating. While designed for harsh conditions, avoid directing high-pressure water jets directly at the seals for extended periods.

8. সমস্যা সমাধান

9. ওয়্যারেন্টি এবং সমর্থন

নাইলাইট ZH409 LED লাইট বার এর সাথে আসে 2 বছরের ওয়ারেন্টি, as indicated in the product description. For warranty claims, technical support, or any inquiries, please contact Nilight customer service through their official channels or visit the অ্যামাজনে নাইলাইট স্টোর.