1. ভূমিকা
This user manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of the Broadcom MegaRAID 9560-16i Storage Controller. This high-performance RAID controller is designed to manage various storage devices, offering robust data protection and efficient data access for server environments.
2. পণ্য শেষview
The Broadcom MegaRAID 9560-16i is a 16-channel storage controller supporting SATA 6Gb/s, SAS 12Gb/s, and PCIe 4.0 (NVMe) interfaces. It supports multiple RAID levels including 0, 1, 5, 6, 10, 50, 60, and JBOD, providing flexible storage solutions. The controller features a PCIe 4.0 x8 interface for high bandwidth connectivity.
2.1 মূল বৈশিষ্ট্য
- Connect up to 240 SAS/SATA devices or 24 NVMe devices per controller.
- লো-প্রোfile form factor suitable for rack-mounted servers.
- Side-mounted SAS connectors for convenient cable management.
- PCIe 4.0 x8 host interface for high-speed data transfer.
- Support for RAID levels 0, 1, 5, 6, 10, 50, 60, and JBOD.
2.2 পণ্য চিত্র
Figure 2.1: Broadcom MegaRAID 9560-16i storage controller. This image displays the green circuit board with a large black heatsink covering the main processor, and multiple SAS/SATA ports on the right side. The card also features a PCIe connector at the bottom and a metal bracket for mounting.
3. সেটআপ এবং ইনস্টলেশন
3.1 সিস্টেমের প্রয়োজনীয়তা
- Available PCIe 4.0 x8 slot or higher.
- Compatible server or personal computer system.
- Operating system with appropriate driver support.
- Sufficient power supply.
3.2 হার্ডওয়্যার ইনস্টলেশন
- পাওয়ার অফ সিস্টেম: Ensure the computer system is completely powered off and disconnected from the power source.
- ওপেন চ্যাসিস: Open the computer chassis to access the motherboard and expansion slots.
- PCIe স্লট সনাক্ত করুন: Identify an available PCIe 4.0 x8 slot.
- Insert Controller: Carefully align the Broadcom MegaRAID 9560-16i controller with the PCIe slot and firmly press it down until it is securely seated.
- নিরাপদ কার্ড: Secure the controller card with the retention mechanism or screw provided by your chassis.
- তারগুলি সংযুক্ত করুন: Connect your SAS/SATA/NVMe drives to the appropriate ports on the controller using compatible cables.
- বন্ধ চ্যাসিস: Close the computer chassis and reconnect the power.
3.3 ড্রাইভার ইনস্টলেশন
After hardware installation, power on the system. You may need to install the appropriate drivers for the Broadcom MegaRAID 9560-16i controller. Drivers are typically available on the Broadcom official support website. Follow the driver installation instructions provided by Broadcom for your specific operating system.
4. অপারেটিং নির্দেশাবলী
4.1 প্রাথমিক কনফিগারেশন
Upon successful driver installation, the controller will be recognized by your operating system. Initial configuration, such as creating RAID arrays, is typically performed through the controller's BIOS utility during system boot-up or via a software utility provided by Broadcom (e.g., MegaRAID Storage Manager).
4.2 Creating RAID Arrays
- Access the RAID controller's configuration utility during system startup (usually by pressing a specific key like Ctrl+R or Ctrl+H when prompted).
- Select the drives you wish to include in the array.
- Choose the desired RAID level (e.g., RAID 0, 1, 5, 6, 10, 50, 60, or JBOD) based on your performance and redundancy requirements.
- Configure array parameters such as stripe size and cache policy.
- Save the configuration and exit the utility. The system will then recognize the new logical drive.
4.3 Monitoring and Management
Use the Broadcom MegaRAID Storage Manager (MSM) or a similar utility to monitor the health of your RAID arrays and connected drives. This software allows you to view array status, perform maintenance tasks, and receive alerts for potential issues.
5. রক্ষণাবেক্ষণ
- ড্রাইভার আপডেট: Regularly check the Broadcom support website for updated drivers and firmware for your MegaRAID controller. Keeping drivers and firmware current can improve performance and stability.
- সিস্টেম কুলিং: Ensure adequate airflow within your server chassis to prevent overheating of the controller and other components.
- ডেটা ব্যাকআপ: While RAID provides data redundancy, it is not a substitute for regular data backups. Always maintain a robust backup strategy for critical data.
- শারীরিক পরিদর্শন: Periodically inspect the controller and its connections for any signs of damage or loose cables.
6. সমস্যা সমাধান
| সমস্যা | সম্ভাব্য কারণ | সমাধান |
|---|---|---|
| Controller not detected by system. | Incorrectly seated in PCIe slot; incompatible slot; power issue; missing drivers. | Ensure controller is fully seated. Try a different PCIe slot. Verify power connections. Install or update drivers. |
| Drives not recognized by controller. | Loose or faulty cables; incompatible drives; drive failure. | Check all data and power cables. Ensure drives are compatible. Test drives individually if possible. |
| RAID array degraded or failed. | Drive failure; improper configuration. | Identify and replace the failed drive. Rebuild the array using the RAID management utility. Review কনফিগারেশন সেটিংস। |
| System performance issues. | Outdated drivers/firmware; high I/O load; insufficient system resources. | Update drivers and firmware. Optimize RAID array settings. Ensure adequate system RAM and CPU. |
For more detailed troubleshooting, refer to the official Broadcom support documentation or contact Broadcom technical support.
7. স্পেসিফিকেশন
| মডেল নম্বর | 05-50077-00 |
| ব্র্যান্ড | Broadcom |
| পণ্যের মাত্রা | 22 x 8 x 3 সেমি; 252 গ্রাম |
| হার্ডওয়্যার ইন্টারফেস | SAS, SATA, PCIe 4.0 (NVMe) |
| চ্যানেল | 16 |
| RAID স্তর সমর্থিত | 0, 1, 5, 6, 10, 50, 60, JBOD |
| হোস্ট ইন্টারফেস | PCIe 4.0 x8 |
| সামঞ্জস্যপূর্ণ ডিভাইস | Personal Computer (Servers) |
| ইউপিসি | 830343007462 |
| ASIN | B08B52PR5Q |
| তারিখ প্রথম উপলব্ধ | 18 এপ্রিল 2020 |
8. ওয়্যারেন্টি এবং সমর্থন
The Broadcom MegaRAID 9560-16i Storage Controller is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your product or visit the official Broadcom webসাইট
For technical support, driver downloads, firmware updates, and additional resources, please visit the Broadcom support portal. It is recommended to have your product model number (05-50077-00) and serial number ready when contacting support.
