xTool D1 Pro লেজার এনগ্রেভার ব্যবহারকারী ম্যানুয়াল

1. ভূমিকা

The xTool D1 Pro 5W Laser Engraver is a versatile and precise machine designed for both beginners and experienced users. It is capable of engraving and cutting a wide range of materials, including wood, leather, acrylic, and glass. This manual provides essential information for the safe and effective operation, setup, maintenance, and troubleshooting of your xTool D1 Pro.

With its 5W output power, the laser module can cut 3mm wood in a single pass and offers an ultra-fine compression spot of 0.06mm*0.06mm for high-accuracy engraving. The machine features advanced safety mechanisms and is compatible with user-friendly software for seamless project creation.

2. নিরাপত্তা তথ্য

Operating a laser engraver requires strict adherence to safety guidelines to prevent injury and damage. Please read and understand all safety instructions before operating the device.

৫.২ চোখের সুরক্ষা

The xTool D1 Pro laser module is equipped with an anti-UV filter acrylic shield that filters 97% of UV rays. However, it is crucial to always wear the provided laser safety goggles during operation to protect your eyes from direct or reflected laser light. Ensure anyone in the vicinity also wears appropriate eye protection.

2.2 ফায়ার সেফটি

• অপারেশন চলাকালীন কখনই মেশিনটিকে অযত্নে রাখবেন না।
• Ensure adequate ventilation in your workspace to dissipate smoke and fumes.
• Keep a fire extinguisher or a bucket of water nearby.
• The engraver machine head is equipped with a buzzer that will sound an alarm if fire is detected during operation. Immediately stop the machine if an alarm sounds or if you observe smoke or flames.

2.3 সাধারণ নিরাপত্তা সতর্কতা

• কর্মক্ষেত্র পরিষ্কার এবং দাহ্য পদার্থ মুক্ত রাখুন।
• কোনও যন্ত্রাংশ ক্ষতিগ্রস্ত হলে মেশিনটি চালাবেন না।
• শিশু এবং পোষা প্রাণীদের অপারেটিং এলাকা থেকে দূরে রাখুন।
• The machine is equipped with X/Y axis limit switches in 4 directions to locate the machine head and alert you if the laser head is about to hit any boundaries, preventing violent bumps.
• An emergency stop function is triggered by the detection of flames, smoke, or tipping of the machine.

3. সেটআপ

Follow these steps for the initial setup of your xTool D1 Pro Laser Engraver.

3.1 আনপ্যাকিং এবং সমাবেশ

Carefully unpack all components and verify against the packing list. Refer to the detailed installation manual for step-by-step assembly instructions.

For detailed assembly instructions, please refer to the official PDF manuals:

• ইনস্টলেশন ম্যানুয়াল (পিডিএফ)
• ব্যবহারের নির্দেশাবলী (IFU) (PDF)

3.2 সফ্টওয়্যার ইনস্টলেশন

The xTool D1 Pro is compatible with xTool Creative Space (XCS) and LightBurn software.

1. xTool Creative Space (XCS): This is a free, all-in-one laser cutter software suitable for beginners, offering graphic design, editing, laser processing, and machine control. It includes sample projects, over 500 elements, 30+ fonts, and default parameters for common materials.
2. লাইটবার্ন: A professional laser cutter software for layout, editing, and control, recommended for advanced users.

Download the latest version of your preferred software from the official xTool website and follow the on-screen installation prompts.

৪.১ প্রাথমিক সংযোগ

Connect the xTool D1 Pro to your computer via USB cable. Ensure all drivers are installed correctly. For wireless operation, configure Wi-Fi settings within the software after initial USB connection.

4. অপারেটিং নির্দেশাবলী

This section outlines the general steps for operating your laser engraver.

৫.২.৩ আপনার নকশা প্রস্তুত করা

Use xTool Creative Space or LightBurn to create or import your design. Adjust parameters such as power, speed, and passes according to the material you are using. The software allows for precise control over the engraving and cutting process.

4.2 Material Placement and Focusing

Place your material securely on the working area. The xTool D1 Pro features a large engraving area of 430x400 mm (17x15.7 inches), allowing for larger projects or multiple smaller items at once.

Adjusting the laser focus is simplified and takes approximately 5 seconds. Pull down the focus lever, confirm the focal distance, slide the laser slider to bring the focus lever close to the material surface, then restore the focus lever. This ensures optimal engraving and cutting quality.

Figure 4.1: xTool D1 Pro Laser Engraver with various engraved and cut sampলেস

Figure 4.2: Illustration of safety features including limit switches and large engraving area.

৬.৩ খোদাই এবং কাটার প্রক্রিয়া

Once the design is prepared and the material is in place, initiate the engraving or cutting process through the software. The D1 Pro can achieve processing speeds of up to 400 mm/s, ensuring high productivity.

Figure 4.3: Comparison highlighting the 0.06mm*0.06mm ultra-fine compression spot of xTool D1 Pro for higher accuracy engraving.

Figure 4.4: Speed comparison showing xTool D1 Pro's processing speed of 400 mm/s.

Figure 4.5: Various materials compatible with xTool D1 Pro, including acrylic, glass, metal, wood, paper, leather, and fabric.

Figure 4.6: Demonstration of the 5W diode laser's capability to cut 3mm basswood in one pass.

5. রক্ষণাবেক্ষণ

Regular maintenance ensures the longevity and optimal performance of your xTool D1 Pro.

• পরিষ্কার করা: Regularly clean the laser lens and the working area to remove dust and debris. Use a soft, lint-free cloth and lens cleaning solution specifically designed for optics.
• রেল লুব্রিকেশন: Apply a small amount of lubricant to the guide rails periodically to ensure smooth movement of the laser module.
• বেল্ট টেনশন: Check the tension of the synchronous belts. They should be taut but not overly tight. Adjust if necessary according to the assembly instructions.
• ফার্মওয়্যার আপডেট: Keep your machine's firmware and software updated to the latest versions for improved performance and new features.

6. সমস্যা সমাধান

এই বিভাগটি আপনার সম্মুখীন হতে পারে এমন সাধারণ সমস্যা এবং তাদের সম্ভাব্য সমাধানগুলি নিয়ে আলোচনা করে।

• লেজার জ্বলছে না:
  - Check all cable connections, especially the laser module connection.
  - Ensure the machine is powered on and the software is connected.
  - Verify that the laser module is properly seated and not obstructed.
• Engraving/Cutting Quality Issues (Pixelated, Incomplete):
  - Ensure the material is properly focused. Re-adjust the focus lever.
  - Check laser lens cleanliness. A dirty lens can significantly reduce laser power.
  - Verify software settings (power, speed, passes) are appropriate for the material.
  - For pixelated engravings, ensure your design is a high-resolution vector image if possible, or that the raster settings are optimized.
• Framing/Alignment Issues:
  - Ensure the material is placed squarely on the workbed.
  - Perform a software update if available. Some alignment issues can be resolved with updated software versions.
  - Recalibrate the machine's home position if the issue persists.
• মেশিন সাড়া দিচ্ছে না:
  - Restart the machine and the software.
  - USB অথবা Wi-Fi সংযোগ পরীক্ষা করুন।
  - Ensure no error messages are displayed in the software or on the machine.
• বাজার অ্যালার্মের শব্দ:
  - This indicates detection of flame, smoke, or machine tipping. Immediately stop the operation and investigate the cause. Address any fire hazards before resuming.

7. স্পেসিফিকেশন

8. ওয়্যারেন্টি এবং সমর্থন

Makeblock Co., Ltd. provides professional customer service and support for your xTool D1 Pro Laser Engraver.

8.1 ওয়ারেন্টি তথ্য

Please refer to the official xTool website or your purchase documentation for detailed warranty terms and conditions. Typically, warranty covers manufacturing defects and malfunctions under normal use.

8.2 প্রযুক্তিগত সহায়তা

If you encounter any problems with the use of your xTool D1 Pro, please do not hesitate to contact the professional customer service team. Support is available through multiple channels:

• ইমেল সমর্থন: বিস্তারিত অনুসন্ধান এবং প্রযুক্তিগত সহায়তার জন্য।
• লাইভ চ্যাট: ব্যবসায়িক সময়ের মধ্যে তাৎক্ষণিক সহায়তার জন্য।
• ফোন সমর্থন: For direct communication regarding urgent issues.
• ফেসবুক গ্রুপ: Join the official xTool community for peer support, tips, and updates.

The support team is dedicated to resolving your problems efficiently and effectively.