Broadcom Dual-Port 100 Gb/s QSFP56 Ethernet PCI Express 4.0 x16 Network Interface Card User Manual

1. ভূমিকা

This manual provides instructions for the installation, operation, and maintenance of the Broadcom Dual-Port 100 Gb/s QSFP56 Ethernet PCI Express 4.0 x16 Network Interface Card (NIC), model BCM957508-P2100G. This device is designed to provide high-speed network connectivity for servers and workstations requiring advanced data transfer capabilities.

2. পণ্য শেষview

The Broadcom BCM957508-P2100G is an internal network interface card featuring dual QSFP56 ports, each capable of 100 Gb/s data transfer rates. It utilizes a PCI Express 4.0 x16 interface for optimal performance and is designed for fiber optic connectivity. The card is compatible with various operating systems, including Windows, macOS, and Linux.

An image showing the Broadcom BCM957508-P2100G network interface card. The card features a green PCB, a large silver heatsink covering the main chip, and two QSFP56 ports on the bracket. The PCI Express connector is visible at the bottom.

3. সেটআপ

3.1. সিস্টেমের প্রয়োজনীয়তা

• Available PCI Express 4.0 x16 slot (compatible with earlier PCIe generations at reduced performance).
• Compatible operating system: Windows, macOS, or Linux.
• Sufficient power supply for the system.
• Appropriate QSFP56 fiber optic transceivers and cables (not included).

3.2. হার্ডওয়্যার ইনস্টলেশন

1. Power off your computer and disconnect the power cord.
2. কম্পিউটার কেস খুলুন।
3. Locate an available PCI Express 4.0 x16 slot on the motherboard.
4. Remove the corresponding expansion slot cover from the computer case.
5. Carefully insert the Broadcom NIC into the PCIe slot, ensuring it is fully seated. Secure the card with the bracket screw or retention clip.
6. কম্পিউটার কেসটি বন্ধ করুন এবং পাওয়ার কর্ডটি পুনরায় সংযোগ করুন।
7. আপনার কম্পিউটারে পাওয়ার।

3.3। ড্রাইভার ইনস্টলেশন

Upon system startup, the operating system may automatically detect and install generic drivers. For optimal performance and full functionality, it is recommended to install the latest drivers from the official Broadcom support website. Refer to the Broadcom website for specific driver download and installation instructions for your operating system.

4. অপারেটিং নির্দেশাবলী

4.1. Connecting Fiber Optic Cables

1. Insert compatible QSFP56 transceivers (not included) into the two QSFP56 ports on the NIC.
2. Connect the appropriate fiber optic cables to the transceivers. Ensure the cables are securely connected and match the type required by your transceivers and network infrastructure.
3. Connect the other end of the fiber optic cables to your network switch or other network devices.

4.2. নেটওয়ার্ক কনফিগারেশন

After driver installation and cable connection, configure the network settings within your operating system. This typically involves:

• Accessing network adapter settings (e.g., Network and Sharing Center in Windows, Network Preferences in macOS, network configuration tools in Linux).
• Assigning IP addresses (DHCP or static).
• Configuring advanced settings such as Jumbo Frames, VLANs, or Link Aggregation if required by your network environment.

Consult your operating system's documentation or network administrator for detailed network configuration procedures.

5. রক্ষণাবেক্ষণ

5.1. সাধারণ যত্ন

• Ensure adequate airflow within the computer case to prevent overheating.
• কার্ডটিকে চরম তাপমাত্রা বা আর্দ্রতায় প্রকাশ করা এড়িয়ে চলুন।
• Handle the card by its edges to prevent damage to components or static discharge.

5.2. পরিষ্কার করা

Periodically inspect the card for dust accumulation, especially on the heatsink. If cleaning is necessary:

• Power off the system and disconnect the power cord.
• Use compressed air to gently remove dust from the heatsink and other components.
• Do not use liquid cleaners directly on the card.

5.3. ফার্মওয়্যার আপডেট

Broadcom may release firmware updates to improve performance, add features, or address issues. Check the official Broadcom support website periodically for available firmware updates and follow their instructions for safe installation.

6. সমস্যা সমাধান

৬. সাধারণ সমস্যা এবং সমাধান

• No Link Light / No Network Connectivity:
  • Verify that the fiber optic cables are securely connected to both the NIC and the network device.
  • Ensure the QSFP56 transceivers are correctly seated and compatible.
  • Check network switch port status and configuration.
  • Confirm that the correct drivers are installed and updated.
• ধীর নেটওয়ার্ক গতি:
  • Ensure the NIC is installed in a PCI Express 4.0 x16 slot for full bandwidth.
  • Verify that the network infrastructure (switch, cables, transceivers) supports 100 Gb/s.
  • ড্রাইভার আপডেটের জন্য পরীক্ষা করুন।
  • Monitor CPU and memory usage on the host system.
• ড্রাইভার ইনস্টলেশন সমস্যা:
  • Download drivers directly from the Broadcom support webসাইট
  • Ensure compatibility with your operating system version.
  • Temporarily disable antivirus software during driver installation if conflicts occur.

যদি সমস্যাগুলি অব্যাহত থাকে, তাহলে ব্রডকম সাপোর্টের সাথে পরামর্শ করুন। webসাইট বা যোগাযোগ প্রযুক্তিগত সহায়তা.

7. স্পেসিফিকেশন

8. ওয়্যারেন্টি এবং সমর্থন

8.1. ওয়ারেন্টি তথ্য

Broadcom products are covered by a limited warranty. For detailed information regarding the warranty period, terms, and conditions applicable to your BCM957508-P2100G Network Interface Card, please refer to the warranty documentation provided with your purchase or visit the official Broadcom webসাইট

8.2। প্রযুক্তিগত সহায়তা

For technical assistance, driver downloads, firmware updates, and additional product documentation, please visit the official Broadcom support webসাইট দ্য website provides resources such as FAQs, knowledge bases, and contact information for customer support.