Niagara Hydrotech Non-Electric Bidet Seat User Manual

1. ভূমিকা

Thank you for choosing the Niagara Hydrotech Non-Electric Bidet Seat. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new bidet seat. Please read this manual thoroughly before installation and retain it for future reference.

This bidet seat is designed to provide a hygienic and comfortable cleansing experience without requiring electricity. It features dual wash nozzles for front and rear cleansing, adjustable water pressure, and a soft-close seat for quiet operation.

2. নিরাপত্তা তথ্য

• জল সরবরাহ: Ensure the water supply to the toilet is turned off before beginning installation.
• জলের চাপ: Do not connect the bidet seat to a hot water supply. This unit is designed for cold water connection only.
• ইনস্টলেশন: Follow all installation steps carefully. If you are unsure about any step, consult a qualified plumber.
• পরিষ্কার করা: Use mild, non-abrasive cleaners. Avoid harsh chemicals that may damage the product finish or internal components.
• শিশু: বাচ্চাদের তত্ত্বাবধান করুন যাতে তারা যন্ত্রের সাথে খেলতে না পারে।

3. প্যাকেজ বিষয়বস্তু

ইনস্টলেশন শুরু করার আগে যাচাই করুন যে সমস্ত উপাদান উপস্থিত আছে।

Image: All components included in the Niagara Hydrotech Bidet Seat package, including the bidet seat, mounting plate, T-adapter, water supply hose, and mounting hardware.

• Niagara Hydrotech Bidet Seat (Elongated)
• মাউন্ট প্লেট
• Mounting Bolts and Washers
• T-Adapter (7/8" x 7/8" x 1/2")
• Braided Metal Water Supply Hose (1/2" x 1/2")
• ইনস্টলেশন ম্যানুয়াল

4. পণ্য শেষview

Familiarize yourself with the different parts of your bidet seat.

ছবি: উপরে থেকে নিচে view of the Niagara Hydrotech Bidet Seat with the lid open, revealing the dual retractable nozzles.

• নিয়ন্ত্রণ নক: Located on the right side, used to select wash mode and adjust water pressure.
• দ্বৈত অগ্রভাগ: Retractable nozzles for front and rear wash.
• দ্রুত রিলিজ বোতাম: Allows for easy removal of the seat for cleaning.
• জল প্রবেশ করান: Connection point for the water supply hose.
• Soft-Close Lid and Seat: স্ল্যামিং প্রতিরোধ করে এবং শব্দ কমায়।

5. ইনস্টলেশন গাইড

This bidet seat is designed for easy DIY installation. No special tools are required beyond a wrench for tightening connections.

5.1 প্রাক-ইনস্টলেশন চেক

• Ensure your toilet bowl is an elongated type. This bidet seat is not compatible with round toilet bowls.

Image: Diagram illustrating the difference between round and elongated toilet bowls, indicating compatibility with elongated bowls.
• Locate the toilet's water supply valve and turn it off. Flush the toilet to drain the tank.
• Place a towel or small bucket under the toilet tank to catch any residual water.

5.2 Removing Your Existing Toilet Seat

1. Lift the hinge covers at the back of your current toilet seat.
2. Unscrew the bolts holding the seat to the toilet bowl. You may need a screwdriver or wrench.
3. Remove the old toilet seat and clean the area thoroughly.

5.3 Installing the Bidet Seat

1. Place the mounting plate over the bolt holes on the toilet bowl. Adjust its position to align with the holes.
2. Insert the mounting bolts through the mounting plate and toilet bowl holes.
3. Secure the bolts from underneath the toilet bowl using the washers and nuts. Do not overtighten yet, allowing for minor adjustments.
4. Slide the Niagara Hydrotech Bidet Seat onto the mounting plate until it clicks into place.

Image: The Niagara Hydrotech Bidet Seat fully installed on a toilet, showing the water connection hose.
5. Adjust the seat's position for a comfortable fit, then fully tighten the mounting bolts.

৩.২ পানি সরবরাহ সংযোগ স্থাপন

1. টয়লেট ট্যাঙ্কের ফিল ভালভ থেকে বিদ্যমান জল সরবরাহের পাইপটি সংযোগ বিচ্ছিন্ন করুন।
2. Install the T-adapter onto the toilet tank's fill valve. Ensure the rubber washer is properly seated to prevent leaks.
3. Reconnect the original toilet water supply hose to the top of the T-adapter.
4. Connect one end of the provided braided metal water supply hose to the side of the T-adapter.
5. Connect the other end of the braided metal water supply hose to the water inlet on the bidet seat.
6. Slowly turn on the toilet's water supply valve. Check for any leaks at all connection points. Tighten connections gently if leaks are observed.

6. অপারেশন

The Niagara Hydrotech Bidet Seat is simple to operate using the control knob located on the right side.

ছবি: একটি ক্লোজ-আপ view of the control knob on the side of the bidet seat, used for adjusting water pressure and selecting wash modes.

6.1 Wash Options

Image: Detail of the dual nozzles, illustrating their function for both front and rear cleansing.

• রিয়ার ওয়াশ: Turn the control knob towards the "Rear" icon. The rear nozzle will extend and spray water.
• সামনে ধোয়া: Turn the control knob towards the "Front" icon. The front nozzle will extend and spray water.

6.2 Adjusting Water Pressure

• While a wash option is selected, continue to rotate the control knob further in the chosen direction to increase water pressure.
• Rotate the knob back towards the center to decrease water pressure.
• To stop the wash, return the control knob to the central "Off" position. The nozzles will retract automatically.

7. রক্ষণাবেক্ষণ এবং পরিষ্কার করা

Regular cleaning ensures optimal performance and hygiene of your bidet seat.

7.1 Routine Cleaning (Quick Release)

Image: A close-up of the quick release button located on the side of the bidet seat, designed for easy removal for cleaning.

1. Press the Quick Release button located on the side of the bidet seat.
2. Slide the bidet seat forward and lift it off the mounting plate.
3. Clean the bidet seat and the toilet bowl area with a mild, non-abrasive cleaner and a soft cloth.
4. Realign the bidet seat with the mounting plate and slide it back until it clicks into place.

৬.২ নজল পরিষ্কার করা

• The nozzles are self-cleaning and retract behind a gate after each use.
• For deeper cleaning, gently pull out the nozzles manually and wipe them with a soft cloth and mild soap. Do not use harsh chemicals or abrasive materials.
• Ensure the nozzles retract fully after cleaning.

8. সমস্যা সমাধান

9. স্পেসিফিকেশন

• মডেল: WP-EL0621
• প্রকার: Non-Electric Bidet Seat
• সামঞ্জস্যতা: Elongated Toilet Bowls
• উপাদান: প্লাস্টিক
• রঙ: সাদা
• পণ্যের মাত্রা: ১২"লি x ৪"ওয়াট
• আইটেম ওজন: 6.36 পাউন্ড
• জল সংযোগ: শুধুমাত্র ঠান্ডা জল
• UPC: 732291500012
• প্রস্তুতকারক: নায়াগ্রা

10. ওয়্যারেন্টি এবং সমর্থন

Niagara products are manufactured to high-quality standards. For warranty information or technical support, please contact Niagara customer service.

• গ্রাহক সেবা: Refer to the contact information provided on the product packaging or the official Niagara webসাইট
• অনলাইন সম্পদ: ভিজিট করুন Niagara Store on Amazon অতিরিক্ত পণ্য তথ্য এবং সহায়তার জন্য।