Luxor HE34 ইউটিলিটি কার্ট ব্যবহারকারী ম্যানুয়াল

ভূমিকা

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your Luxor HE34 Utility Cart. Designed for enhanced mobility, storage, and durability, this multipurpose cart is suitable for various environments including warehouses, shops, garages, cafes, offices, and schools. Its structural foam plastic construction ensures resistance to denting, scratching, and rusting.

Image: The Luxor HE34 Utility Cart in gray, featuring three flat shelves, an ergonomic push handle, and four heavy-duty casters. This cart is designed for versatile use and easy transport of items.

নিরাপত্তা তথ্য

• Always ensure the cart is on a stable, level surface before loading or unloading.
• সর্বোচ্চ ওজন ধারণক্ষমতা ৩০০ পাউন্ড (১৩৬ কেজি) অতিক্রম করবেন না।
• Engage the locking brakes on the casters when the cart is stationary to prevent unintended movement.
• স্থিতিশীলতা বজায় রাখার জন্য তাকের উপর সমানভাবে ওজন বিতরণ করুন।
• Keep hands and feet clear of moving parts, especially during assembly and when moving the cart.
• Use caution when moving the cart over uneven surfaces or thresholds.

প্যাকেজ বিষয়বস্তু

সমাবেশ শুরু করার আগে সমস্ত উপাদান উপস্থিত আছে কিনা তা যাচাই করুন:

• Three (3) Structural Foam Plastic Shelves
• Four (4) Leg Posts
• Four (4) 4-inch Heavy-Duty Casters (2 stationary, 2 swiveling with locking brakes)
• Assembly Hardware (screws, nuts, etc. - specific types may vary, refer to included hardware bag)
• Assembly Instructions Sheet

সমাবেশ নির্দেশাবলী

Assembly is required for the Luxor HE34 Utility Cart. Please follow these steps carefully:

1. আনপ্যাক উপাদান: Carefully remove all parts from the packaging and lay them out on a clean, flat surface. Verify all components are present as per the "Package Contents" section.
2. কাস্টার সংযুক্ত করুন: Insert the four heavy-duty casters into the designated holes on the bottom of the lowest shelf. Ensure the two locking casters are placed on the same side (e.g., the side with the push handle) for easier access. Secure them firmly.
3. Install Lower Legs: Insert the four leg posts into the corner receptacles of the lowest shelf. Ensure they are fully seated.
4. Place Middle Shelf: Carefully lower the middle shelf onto the top of the installed leg posts, aligning the receptacles with the posts. Press down firmly until the shelf is securely in place.
5. Install Upper Legs: Insert the remaining four leg posts into the corner receptacles of the middle shelf.
6. স্থানের শীর্ষ তাক: Lower the top shelf onto the upper leg posts. This shelf includes the ergonomic push handle. Ensure it is oriented correctly and fully seated.
7. চূড়ান্ত চেক: Once assembled, gently rock the cart to ensure all connections are secure and stable. If any part feels loose, re-check the assembly steps.

দ্রষ্টব্য: No special tools are typically required for assembly, as components are designed to fit securely. However, a rubber mallet may be used gently to ensure full seating of posts into shelves if needed.

অপারেটিং নির্দেশাবলী

Loading the Cart

• Ensure the cart's locking casters are engaged before loading items.
• Distribute the weight of items evenly across the three shelves to maintain balance and stability.
• Place heavier items on the lower shelves to reduce the center of gravity and improve stability during transport.
• The .25-inch retaining lip on each shelf helps prevent items from sliding off during movement.
• Do not overload the cart beyond its 300-pound weight limit.

কার্ট সরানো

• Disengage the locking casters before moving the cart.
• Use the ergonomic push handle molded into the top shelf for comfortable maneuvering.
• Push the cart slowly and steadily, especially when heavily loaded or navigating turns.
• Be mindful of obstacles, uneven surfaces, and doorways.

Parking the Cart

• Once the cart is in its desired stationary position, engage the locking brakes on the two swiveling casters to prevent accidental movement.

রক্ষণাবেক্ষণ

The Luxor HE34 Utility Cart is designed for low maintenance due to its durable structural foam plastic construction. Follow these simple guidelines to ensure its longevity:

• পরিষ্কার করা: Wipe down the shelves and legs with a damp cloth and mild soap as needed. Avoid abrasive cleaners or solvents that could damage the plastic. The molded plastic will not rust, dent, scratch, or stain.
• কাস্টার পরিদর্শন: Periodically check the casters for any debris (e.g., hair, string) that might impede their rotation. Clean as necessary. Ensure casters are securely attached.
• সঞ্চয়স্থান: Store the cart in a dry environment when not in use.

সমস্যা সমাধান

স্পেসিফিকেশন

ওয়্যারেন্টি এবং সমর্থন

For warranty information or technical support regarding your Luxor HE34 Utility Cart, please refer to the official Luxor website or contact their customer service department directly. Contact details are typically provided with the product packaging or on the manufacturer's official webসাইট

প্রস্তুতকারক: লাক্সর

Webসাইট: অ্যামাজনে লুক্সর স্টোরটি দেখুন (সাধারণ ব্র্যান্ড তথ্যের জন্য)

Please have your model number (HE34) and purchase details ready when contacting support.