BASTL INSTRUMENTS logoBASTL INSTRUMENTS SOFTPOP SP2 Oscillator Synthesizer - logo 2দ্রুত শুরু করুন

SOFTPOP SP2 অসিলেটর সিন্থেসাইজার

THIS SOFTPOP SP2 IS RUNNING
THE DIGITAL VCO FIRMWARE.
By default, the Softpop SP2 oscillator produces a PULSE wave. By patching TRI into FILTER IN, you can change the waveform.

BASTL INSTRUMENTS SOFTPOP SP2 Oscillator Synthesizer - THE DIGITAL VCO FIRMWARE

To switch oscillator waveforms at the TRI output, hold SLIDE + MIDI and press GATE buttons 1-8.
Hold SLIDE and move the FINE TUNE fader to alter the shape of each waveform.

BASTL INSTRUMENTS SOFTPOP SP2 Oscillator Synthesizer - QR Codehttps://bastl-instruments.com/content/files/softpop2-digitalvco-manual.pdf

● Fractal Triangle
● Animated Fractal Triangle
● Super Triangle
● Triangle To Noise
● 2×Fractal Triangle
● Exp Saw Detune
● Super Saw
● Glitch Radio

See the full manual here

WWW.BASTL-INSTRUMENTS.COMBASTL INSTRUMENTS SOFTPOP SP2 Oscillator Synthesizer - QR Code 2Join our Community here

বোতাম কম্বোস

বেসিক্স
PLAY= ▲ and TRIG= ▼ when used with other buttons
GATE=যেকোনো একটি গেট টিপুন
GATES=press multiple gates one after another while still holding the context button

PATTERN+SLIDE+PITCH FADER = RECORD pitch sequence
PATTERN+SLIDE+TRIG = RECORD gate sequence
SLIDE+MIDI+GATE = select waveform
SLIDE+FINE TUNE = alter the wave shape of the waveform
স্কেল+স্লাইড=সেভ ব্যাঙ্ক
স্কেল+প্যাটার্ন+গেট=লোড ব্যাঙ্ক

SCALE+GATE=একটি স্কেল নির্বাচন করুন
SCALE+GATES=চেইন স্কেল
স্কেল+ ▲/▼ = একটি সেমিটোন নির্বাচন করুন
SCALE+TEMPO=semitone on/off (indicated by PLAY LED and GATE 1)
স্কেল+টেম্পো+ ▲/▼ = একটি সেমিটোন দ্বারা পুরো স্কেল স্থানান্তর করুন
SCALE+MIDI=copy MIDI-defined scale to the currently edited scale

MIDI
MIDI >5s=MIDI শিখুন
MIDI+GATE=MIDI চ্যানেল 1 থেকে 8-এ সেট করুন
MIDI+selected GATE=set MIDI channel to 8+1 to 8
MIDI+PLAY=MIDI ঘড়ি সক্রিয়/নিষ্ক্রিয় করুন
MIDI+SCALE=MIDI স্কেল মোড সক্রিয়/নিষ্ক্রিয় করুন
MIDI+PATTERN=সিভি অ্যাক্টিভেট/ডিঅ্যাক্টিভেট করুন বেগ সিভি তৈরি করে
MIDI+TRIG=activate automatic envelope triggering from MIDI Notes

ফার্মওয়্যার আপডেট
Hold MIDI at startup and play a WAV file into the Reset input.

সিকোয়েন্সার
PATTERN+GATE=একটি প্যাটার্ন নির্বাচন করুন
PATTERN+GATES=চেইন প্যাটার্ন
প্যাটার্ন+ ▲/▼ = 1 ধাপে একটি সম্পূর্ণ প্যাটার্ন স্থানান্তর করুন

PATTERN+TEMPO=copy currently selected pattern to the next selected pattern
PATTERN+MIDI=activate triggered pitch mode = pitch is only updated on active gates

SLIDE+GATE=activate/deactivate the slide on that step SLIDE+ ▲/▼ =set slide rate (1=no slide)

PLAY (সংক্ষিপ্ত) = শুরু করুন এবং সিকোয়েন্সার বন্ধ করুন
প্লে+গেট=প্লেমোড নির্বাচন করুন
PLAY+GATES=চেইন প্লেমোড

টেম্পো+টেম্পো=টেপ টেম্পো
TEMPO+ ▲/▼ =increase/decrease tempo
TEMPO+ ▲/▼ >1s= ধীরে ধীরে টেম্পো বাড়ান/কমান
TEMPO+GATE=বিভাজক/গুণক নির্বাচন করুন
টেম্পো+ ▲+▼ = লুপিং খাম থেকে টেম্পো শিখুন

TRIG=ট্রিগার খাম
TRIG+GATE=activate temporary FX (hold several to combine)
TRIG+PLAY+GATES=অস্থায়ী এফএক্সের রেকর্ড লুপ
TRIG+PLAY=অস্থায়ী FX এর লুপ মুছে দিন
TRIG+SLIDE=set ENV G to GATE/TRIGGER
TRIG+PATTERN=set SLIDE G to GATE/TRIGGER

DIRECT STEP EDITING
GATE+ ▲/▼ = edit step pitch
GATE+PITCH FDER = edit step pitch
GATE+TEMPO = preview step pitch

BOOT/POWER UP SETTINGS
Hold SCALE at power up=shorten the range of the PITCH fader
Hold SLIDE at power up=make FINE-TUNE fader control waveshape by default, FINE-TUNE is hidden under SLIDE+FINE-TUNE
Hold PATTERN at power up=toggle CV Pitch tracking mode for CV out
Hold SCALE+SLIDE at power up = calibration and test mode
Hold PLAY+TEMPO+TRIG at power up=factory reset

BASTL INSTRUMENTS SOFTPOP SP2 Oscillator Synthesizer - Figure 1

ভূমিকা

ডুমুর 01

0. Connect USB power, flip the POWER switch UP, and connect headphones or a speaker to the OUTPUT
1. Put all controls into the indicated position to start
2. Start playing with PITCH and CUTOFF
3. Bring PITCH MOD and CUTOFF MOD faders UP to modulate them
4. Use the envelope RATE and SHAPE to change the modulation
5. Explore the RESONANCE and POP faders along with the filter mode HP/BP/LP switch

সিকোয়েন্সার

It is the digital brain of the softPop2 and will make it sound musical in no time.

অসিলেটর

আপনার টোনালিটির উৎস।
বাম ফ্যাডার হল অসিলেটরের পিচ।
SCALE selects the semitones used. Hold SCALE and press one of the 8 GATE buttons to select a scale.
The right fader is the PITCH MOD. It adds pitch modulation, which is randomized each time the envelope is triggered.
FINE-TUNE টিউনিং সামঞ্জস্য করে। ডানদিকে রাখুন।

ফিল্টার

CUTOFF ফ্রিকোয়েন্সিতে সাউন্ড স্পেকট্রাম কেটে আপনার শব্দের রঙ/কাঠকে আকার দেয়।
বাম ফ্যাডার হল CUTOFF ফ্রিকোয়েন্সি।

BASTL INSTRUMENTS SOFTPOP SP2 Oscillator Synthesizer - FILTER

HP/BP/LP সুইচ ফিল্টার প্রকার নির্বাচন করে।
HP=Highpass: passes frequencies above the cutoff (cuts bass)
BP=Bandpass: passes frequencies around the cutoff (cuts bass and treble)
LP=Lowpass: passes frequencies below the cutoff (cuts treble)
ডান ফ্যাডার হল CUTOFF MOD: খাম কতটা কাটঅফ ফ্রিকোয়েন্সি প্রভাবিত করে।
RESONANCE makes the filter self-oscillate and emphasizes frequencies around the cutoff frequency.
POP increases the cross-modulation between the oscillator and filter, resulting in a harsher sound to the right. Keep left for softer sounds.

ENVELOPE

সময়ের সাথে আপনার শব্দের চরিত্রকে আকার দেয়।
RATE খামের গতি নিয়ন্ত্রণ করে।
SHAPE খামের আক্রমণ এবং ক্ষয় পর্বের মধ্যে অনুপাত সামঞ্জস্য করে।
CYCLE খামটিকে একটি LFO এর মতো দোদুল্যমান করে তোলে।

BASTL INSTRUMENTS SOFTPOP SP2 Oscillator Synthesizer - ENVELOPE

TRIG একবার খামটি ট্রিগার করবে।
The DRONE/ENV switch lets you select between DRONE
(sound always on) or ENV (volume increases with the envelope).

BASTL INSTRUMENTS SOFTPOP SP2 Oscillator Synthesizer - Figure 2

সিকোয়েন্সার ভূমিকা

ডুমুর 02

0. To start, set the CYCLE switch of the envelope to the lower position (off).
1. Press the PLAY button so it starts blinking.
If it is not blinking, adjust the tempo settings.BASTL INSTRUMENTS SOFTPOP SP2 Oscillator Synthesizer - tempo settings2. Press the GATE buttons to select when the envelope is triggered. Flip the DRONE/ENV switch or pull the CUTOFF MOD fader to hear the effect of the envelope.
3. To RECORD a melody:
a) hold down PATTERN+SLIDE to RECORD
b) move the PITCH FADER to RECORD (keep the PITCH MOD fader down for start)
c) release PATTERN+SLIDE buttons to hear your melody.
4. Bring up PITCH MOD to apply randomness to your melody.
5. Hold SCALE and press GATE to select a scale. Press multiple GATES in a row to chain scales.
6. Hold PATTERN and press GATE to select and make a new pattern.
7. When you have more patterns, let’s make them play one after another. Hold PATTERN and press several GATES in a row to chain the patterns.
8. Press SLIDE + SCALE to SAVE all your music for the next time you turn on the softPop2.
9. Hold a GATE and press UP/DOWN or move the PITCH FADER to edit the pitch of the step.
10. Hold GATE and press TEMPO to preview the pitch of the step.

ইউনিটটি অন্বেষণ করুন এবং ডিকোড করার চেষ্টা করুন
সফ্টপপ 2 এর সাথে আপনি যে সমস্ত দুর্দান্ত জিনিসগুলি করতে পারেন!

BASTL INSTRUMENTS logo

দলিল/সম্পদ

BASTL INSTRUMENTS SOFTPOP SP2 Oscillator Synthesizer [পিডিএফ] নির্দেশিকা ম্যানুয়াল
SOFTPOP SP2, SOFTPOP SP2 Oscillator Synthesizer, Oscillator Synthesizer, Synthesizer

তথ্যসূত্র

একটি মন্তব্য করুন

আপনার ইমেল ঠিকানা প্রকাশ করা হবে না. প্রয়োজনীয় ক্ষেত্রগুলি চিহ্নিত করা হয়েছে *