ইলেক্ট্রোব-লোগো

Electrobes ESP32-S3 Development Board

Electrobes-ESP32-S3-Development-Board-product

স্পেসিফিকেশন

  • পণ্যের নাম: ESP32 উন্নয়ন বোর্ড
  • প্রস্তুতকারক: এসপ্রেসিফ সিস্টেমস
  • সামঞ্জস্যতা: আরডুইনো আইডিই
  • ওয়্যারলেস সংযোগ: ওয়াইফাই

নির্দেশনা

Download software and development board

  • We use modules in Arduino IDE (which can be downloaded from the official website) https://www.arduino.cc/en/Main/Software. Using the development environment as an example to illustrate the usage of modules.
  • Open the Arduino IDE softwareElectrobes-ESP32-S3-Development-Board-fig1. The following interface appears。Electrobes-ESP32-S3-Development-Board-fig2

Add ESP32 development environment

  • ESP32 development environment add path
  • In Arduino IDE, open File ->Preferences (shortcut key ‘Ctrl+,’).
  • Support https://dl.espressif.com/dl/package_esp32_index.json Put the JSON address of this development board into the attachment
  • মধ্যে webডেভেলপমেন্ট বোর্ড ম্যানেজারের সাইট। 'ঠিক আছে' ক্লিক করুন (নতুন সংস্করণটি 'ঠিক আছে')। Arduino IDE হোমপেজে ফিরে যেতে আবার 'ঠিক আছে' ক্লিক করুন (নতুন সংস্করণটি 'ঠিক আছে')।Electrobes-ESP32-S3-Development-Board-fig3
  • ডেভেলপমেন্ট বোর্ড ম্যানেজারে ক্লিক করুন, ডেভেলপমেন্ট বোর্ড ম্যানেজার উইন্ডোটি প্রদর্শিত হবে, ESP32 অনুসন্ধান করুন এবং ডেভেলপমেন্ট পরিবেশ ইনস্টল করুন।Electrobes-ESP32-S3-Development-Board-fig4Electrobes-ESP32-S3-Development-Board-fig5
  • ইনস্টল করা মডিউলগুলি সরাসরি ব্যবহার করা যেতে পারে। আনইনস্টল করা মডিউলগুলি ইনস্টল করার পরে, ডেভেলপমেন্ট বোর্ডে দেখা যাবে যে ESP32 মডিউলগুলির জন্য প্রচুর সমর্থন যোগ করা হয়েছে।Electrobes-ESP32-S3-Development-Board-fig7

Select the corresponding port and development board model

  • Manually enter download mode: Method 1: Press and hold BOOT to power on. Method 2: Hold down the BOOT button on ESP32C3, then press the RESET button, release the RESET button, and then release the BOOT button. At this point, ESP32C3 will enter download mode.Electrobes-ESP32-S3-Development-Board-fig8
  • Click upload and wait for the download to complete. The RGB lights on the module will flash normally and a WiFi connection will be established.Electrobes-ESP32-S3-Development-Board-fig9Electrobes-ESP32-S3-Development-Board-fig10

FAQs

How do I know if the ESP32 module is successfully programmed?

Upon successful programming, the RGB lights on the module will flash normally, and a WiFi connection will be established.

Can I use other development environments with the ESP32 board?

The ESP32 board is specifically designed for use with Arduino IDE for optimal performance and compatibility.

দলিল/সম্পদ

Electrobes ESP32-S3 Development Board [পিডিএফ] ব্যবহারকারী ম্যানুয়াল
ESP32-S3, ESP32-C3, ESP32-H2, ESP32-C6, ESP32-S3 Development Board, ESP32-S3, Development Board, Board

তথ্যসূত্র

একটি মন্তব্য করুন

আপনার ইমেল ঠিকানা প্রকাশ করা হবে না. প্রয়োজনীয় ক্ষেত্রগুলি চিহ্নিত করা হয়েছে *