বিষয়বস্তু
লুকান
Elitech IPT-100, IPT-100S Temperature and Humidity Data Logger
নিরাপত্তা নির্দেশাবলী
- To ensure proper installation and usage of this product, please read carefully and follow the guidelines below:
ব্যাটারি
- Use three AAA batteries. Do not use other types of batteries to avoid damaging the device or causing other malfunctions.
- Do not disassemble, crush, strike, or heat the batteries. Do not place them in fire, as this may cause the batteries to explode and trigger a fire.
ডিভাইস
- Do not use the device in flammable or explosive gas environments to avoid the risk of explosion or fire.
- lf the device emits a burnt smell or other unusual odors, disconnect the power and contact the manufacturer or supplier immediately.
সতর্কতা
- If the device will not be used for an extended period, remove the batteries and store the device in a dry, cool environment.
- Users are not allowed to make any unauthorized changes to the device.
- Unauthorized modifications may affect the accuracy of the device or even cause damage.
- Do not use the device outdoors to avoid malfunctions caused by rain, lightning, or other adverse weather conditions.
- Use the device within its designated temperature and humidity range.
- Do not subject the product to heavy impact.
- Measurement values may be affected by the following factors:
- তাপমাত্রা ত্রুটি:
- Insufficient stabilization time in the measurement environment.
Proximity to heat or cold sources or direct exposure to sunlight.
- Insufficient stabilization time in the measurement environment.
- আর্দ্রতা ত্রুটি:
- Insufficient stabilization time in the measurement environment.Long-term exposure to steam, mist, water curtains, or condensation environments.
- দূষণ:
Presence of dust or other pollutants in the environment.
পণ্য শেষview
- The temperature and humidity meter is designed for industrial workshops, warehousespharmacies, laboratories, agricultural environments, and other professional settings for monitoring environmental temperature and humidity.
পণ্য বৈশিষ্ট্য
- Supports OTA updates for continuous improvements.
- ডাটা হতে পারে viewed and traced through the mobile app for easier tracking.
- Scenario-based configuration with smart alerts.
- 4-inch large screen for clear data display.
পণ্যের চেহারা
- সর্বোচ্চ/মিনিটের বোতাম
- ℃/℉ toggle button
- Mode/Bluetooth button
- External probe interface
- চুম্বক
- ব্যাটারি কভার
- দাঁড়ান
- External temperature sensor (Standard for IPT-100S)
পণ্য ইন্টারফেস
- ব্যাটারি স্তরের আইকন
- ব্লুটুথ আইকন
- Placeholder icon (no function)
- অ্যালার্ম আইকন
- Recording display icon
- External probe display mode
- Max/Min indicator icon
- সময় প্রদর্শন এলাকা
- Backtrack temperature display area
- Backtrack time indicator area
- তাপমাত্রা প্রদর্শন অঞ্চল
- Over-limit status display (over upper limit
, over lower limit
- Humidity range indicator area
- আর্দ্রতা প্রদর্শন অঞ্চল
প্রযুক্তিগত পরামিতি
|
পরিমাপ পরিসীমা |
তাপমাত্রা:-10°C ~50°C |
| Humidity:10%RH~99%RH | |
|
নির্ভুলতা |
Temperature:+0.5°C(10-35°C),+1°C for other ranges |
| Humidity: +5%RH(40%-75%),+10% for other ranges | |
|
রেজোলিউশন |
তাপমাত্রা: 0.1°C |
| আর্দ্রতা: 0.1% RH | |
| পাওয়ার সাপ্লাই | 3*AAA |
| স্ট্যান্ডবাই টাইম | Not less than 6 months |
| পর্দা | 4.5-inch segmented display |
| ডেটা রেকর্ডিং | Not less than 5000 entries |
| ব্লুটুথ রেঞ্জ | Up to 30 meters in an open environment |
| অপারেটিং এনভায়রনমেন্ট | -20~60℃, 0~90%RH (non-condensing) |
| স্টোরেজ পরিবেশ | -25~65℃, 0~90%RH (non-condensing) |
| মাত্রা | 118.6*99.5*23.0 মিমি |
Accessories External Probe
- (Applicable only to IPT-100S with built-in external probe)
পরিমাপ পরিসীমা Temperature:-20°C~70℃ নির্ভুলতা Temperature:+0.5°C(0℃~40°℃),+1°C for other ranges রেজোলিউশন তাপমাত্রা: 0.1 ℃ ইন্টারফেসের ধরন Type-C port (Note: This port does not support charging!) অপারেটিং এনভায়রনমেন্ট -40~85℃, 0~90%RH (non-condensing) স্টোরেজ পরিবেশ -50~90℃, 0~90%RH (non-condensing) সেন্সর প্রকার ডিজিটাল তাপমাত্রা সেন্সর লাইনের দৈর্ঘ্য 2 মিটার
পণ্য বৈশিষ্ট্য
- পণ্য সক্রিয়করণ
- Remove the insulating strip from the back of the product to power it on. The screen will display all data for 2 seconds and then show the real-time readings from the internal sensor.
- Note: After powering on, connect the device to your phone via Bluetooth to sync the time. If not in use for a long period, remove the batteries and store them separately.
- The Type-C interface is only for connecting the external probe, not for charging.
- .Button Functions:
বোতাম
সংক্ষিপ্ত প্রেস
দীর্ঘ প্রেস 2s
Switch between max, min, and current values Clear maximum and minimum values 
Toggle backtrack time Switch temperature unit (°C/°F) 
Switch between internal/external probe data displayব্লুটুথ সক্ষম / অক্ষম করুন - মোড স্যুইচিং:
Press the mode button to switch between the internal sensor’s temperature and humidity data and the external probe’s temperature data.- Note: If no external probe is connected, the external probe mode will show “—” and the external probe icon will light up.
- View Max/Min Values:
short Press the max/min button to cycle between the maximum, minimum, and current values in the current mode.- Long-press the button to reset the maximum and minimum values.
- Humidity Indicator:
- By default, when the humidity is below 40%, the indicator turns red to show dry conditions. Between 40%-60%, it turns green to show comfortable conditions, and above 60%, it turns blue to show humid conditions. The app allows customization of these ranges.
- Note: Default values are based on the “Indoor Air Quality Standard” (GB/T 18883-2022)
- Product Alarms
প্রদর্শন
কারণ সমাধান বিপ Current data exceeds the limit Automatic mute after 60 seconds, or press any key to mute 
Current data exceeds সীমা
Automatically cancels when data স্বাভাবিক অবস্থায় ফিরে আসে
Exceeded the upper limit of the display range Automatically cancels when data returns to normal 
Exceeded the lower limit of the display range সেন্সর সনাক্ত করা যায়নি
Automatically cancels when data returns to normal Insert or replace the sensor
APP অপারেশন নির্দেশাবলী
APP সংযোগ
- Scan the QR code below to download and install the dedicated APP, or search for “Elitech Tools” in the app store to install.
- দীর্ঘক্ষণ চাপুন Bluetooth button for 2 seconds to enable Bluetooth. The Bluetooth icon will flash. Open the “Elitech Tools” app, search for nearby devices, find the correct model, and click to connect.
-
- Note: Ensure your phone’s Bluetooth is enabled while using the app. The device’s Bluetooth will automatically turn off if not connected within 2 minutes.
APP ইন্টারফেস ভূমিকা
- The main interface displays the current built-in temperature, humidity, probe temperature, and max/min value. By clicking
, you can reset the max/min values. When the temperature or humidity exceeds the upper or lower alarm limits, the alarm icon will appear in the corresponding alarm zone
- Click the text in the upper right corner to switch Scene Mode
- Click the dial to switch to the curve interface and view the temperature and humidity curves.
- Click “Settings” to modify relevant parameters
- Click “Scene Settings” to select the scene you want to modify
- Modify the alarm parameters for this scene.
- Modify humidity range value
সংযুক্তি তালিকা
- Recording-type Temperature and Humidity Meter *1
- AAA Batteries *3
- চুম্বক*2
- External Temperature Sensor Probe *1
- (only for IPT-100S with built-in external probe)
FAQ
প্রশ্ন: ডিভাইসটি বাইরে ব্যবহার করা যেতে পারে?
A: No, the device should not be used outdoors to avoid malfunctions caused by adverse weather conditions.
প্রশ্ন: আমি কীভাবে ডিভাইসটি ক্যালিব্রেট করব?
A: Calibration is not user-accessible. Please contact customer Support if you believe your device requires calibration.
দলিল/সম্পদ
 |
Elitech IPT-100, IPT-100S Temperature and Humidity Data Logger [পিডিএফ] নির্দেশিকা ম্যানুয়াল IPT-100, IPT-100S, IPT-100 IPT-100S Temperature and Humidity Data Logger, IPT-100 IPT-100S, Temperature and Humidity Data Logger, Humidity Data Logger, Data Logger, Logger |