FOXTECH RDD-25A Visual Payload Release and Drop Device
পণ্য ব্যবহারের নির্দেশাবলী
- Turn the drone upside down and remove the two screws at the bottom of the gimbal.
- Align and insert the alloy bracket into the connection point between the gimbal and airframe, fasten with screws.
- Connect the mounting plate to the alloy bracket, adjust the position, and fasten with screws.
- Connect the device’s power pickup to the mounting plate’s power port, ensuring alignment.
- Insert the connector of the payload release and drop device into the corresponding interface on the visual module.
- After installation, ensure all connections are secure and the power pickup is aligned correctly.
- The device is now ready for operation. Follow specific payload release instructions based on your requirements.
পণ্য ওভারview
- The RDD-25A device is a modular visual payload release system, consisting of one video capture module and one 4 -4-channel payload release module.
- The video capture module is mounted to the gimbal interface, transmitting downward video to the remote controller.
- The payload release module is mounted under the drone body and connected to the video module via a Type-C cable, sharing the drone’s PSDK interface. Each release unit can carry up to 2.5 kg of payload.
- The four units can be released sequentially or simultaneously.
- আমাদের পণ্য কেনার জন্য আপনাকে ধন্যবাদ.
- If you encounter any problems during use, please contact your sales representative in time.
দাবিত্যাগ
- Without prior written permission, no organization or individual may excerpt, copy, or reproduce any part or all of this manual, nor distribute it in any form.
- Due to product version upgrades or other reasons, the content of this manual may be updated periodically.
- This manual is for user guidance only.
- All statements, information, and recommendations in this manual do not constitute any express or implied warranty.
প্যাকেজ বিষয়বস্তু
| নাম | পরিমাণ | ইউনিট |
| আরডিডি-২৫এ | 1 | সেট |
| ভিজ্যুয়াল মডিউল | 1 | সেট |
| প্যাকেজিং বক্স | 1 | সেট |
| Payload Release Hook Rir gs | 12 | টুকরা |
| সামঞ্জস্যের শংসাপত্র | 1 | টুকরা |
Understanding the 4-Channel Visual Payload Release and Drop Device
ডিভাইস ইনস্টলেশন
ধাপ 1:
- Turn the drone upside down and remove the two screws at the bottom of the gimbal.
ধাপ 2:
- Confirm the connection position between the alloy bracket and the drone. To better fit the drone body, the bottom of the alloy bracket is slanted and one side has a groove. During installation, align the bottom of the alloy bracket with the drone body, with the grooved side facing outward.
ধাপ 3:
- Insert one end of the alloy bracket into the middle of the connection point between the gimbal and the airframe, align the screw holes at both ends of the alloy bracket with the corresponding holes on the airframe, fasten the alloy bracket to the airframe at the gimbal-connection side using the supplied M3*10 screws, and fasten the other end using the supplied M3*8 screws.
ধাপ 4:
- Connect the mounting plate to the alloy bracket, with the cable outlet facing the nose of the aircraft; adjust the exact mounting position of the plate as needed for actual use, and fasten the mounting plate to the alloy bracket using the supplied M3*8 screws.
ধাপ 5:
- Connect the device’s power pickup to the mounting plate’s power port. Make sure the groove on the power pickup is aligned with the power port. After insertion, confirm that the quick-release latches on both sides have fully popped out before normal use (depending on the purchased version, connect the mounting plate interface to the HUB or to the aircraft’s E-PORT).
ধাপ 6:
- Insert the connector of the payload release and drop device into the corresponding interface on the visual module.
ধাপ 7:
- As shown in the figure, manually press the hook control button to set the hook into standby release mode. After connecting the matching metal ring to the payload, hang it on the hook.
ডিভাইস অপারেশন
- PSDK Button: Single click to open/close the 4-Channel Payload Release and Drop Device operation menu
Operation Button Description
Payload Control
Open the Payload settings; you can also operate the 4-Channel Payload Release and Drop Device through this menu (tap the menu icon in the upper-right corner of the remote controller
to enter Payload settings.
Display real-time data switch: Show/Hide the working status and detailed information of the 4-Channel Payload Release and
ডিভাইসটি ফেলে দিন
Single click to unlock/lock; after unlocking, the device can operate normally
- Hook 1: Single click to release
- Hook 2: Single click to release
- Hook 3: Single click to release
- Hook 4: Single click to release
One-key all-release switch: Single click to release
সমস্যা সমাধান
| 1 | No PSDK control icon | 1. Check whether the wiring is correct. For the M350 version, plug into the top E-PORT of the aircraft and pay attention to the connector orientation. For the M300 version, connect to the supplied adapter ring and plug into the gimbal. For the visual version, connect the Type-C cable to the visual module and install the visual module on the gimbal.
2. Check the drone and remote controller firmware; they must be updated to the latest version. |
| 2 | Incomplete PSDK icon display | 1. Close the Pilot2 flight app in the background and re-enter, or restart.
2. Check the drone and remote controller firmware; they must be updated to the latest version. |
Device External Interfaces
- Hardware Interfaces: None for third-party hardware
- Software Protocol Interfaces: None
প্রযুক্তিগত বিশেষ উল্লেখ
- পণ্যের মাত্রা: 125 x 117 x 60 মিমি
- পণ্যের ওজন: 430 গ্রাম
- Interface Type: SKYPORT V2
- Control Method: PSDK
- System Power: 20 W
- অপারেটিং তাপমাত্রা: -20°C থেকে 60°C
- চ্যানেলের সংখ্যা: 4
- Control Mode: Independent channel control; select any release index or one-key all release
- Control Range: Same as the aircraft communication range
- Status Feedback: Real-time feedback for each channel
- Mounting Method: Gimbal and belly mounting
- P HUB: Supported
- Payload Capacity: 2.5 kg per channel
- Video Resolution: 1080P @ 30 fps
FAQ
Q: How do I know if the device is correctly installed?
A: Ensure all components are securely connected, and the power pickup is aligned with the mounting plate's power port. Confirm proper alignment and attachment of all parts before operation.
Q: Can I use this device with any drone model?
A: The device is designed for compatibility with specific drone models. Refer to the user manual or contact support for information on compatible drones.
দলিল/সম্পদ
 |
FOXTECH RDD-25A Visual Payload Release and Drop Device [পিডিএফ] ব্যবহারকারী ম্যানুয়াল FT100P-A, RDD-25A Visual Payload Release and Drop Device, RDD-25A, Visual Payload Release and Drop Device, Payload Release and Drop Device, Release and Drop Device, Drop Device |