IME IDM Configuration Software

পণ্য তথ্য

• Product Name: IDM Configuration Software
• সফ্টওয়্যার সংস্করণ: 1.00.00
• Operating System Compatibility: Windows 10, Windows 7, etc.

পণ্য ব্যবহারের নির্দেশাবলী

1. ইনস্টলেশন
   1. Download the IDM Configuration Software from the IME webসাইট
   2. ইনস্টলেশন চালান file (.exe)।
   3. Choose the language and click OK.
   4. ইনস্টলেশন প্রক্রিয়া সম্পূর্ণ করতে অন-স্ক্রীন নির্দেশাবলী অনুসরণ করুন।
2. Modification of Software’s Language
   1. In the software’s home page, click on “Software configuration”.
   2. পছন্দসই ভাষা চয়ন করুন।
   3. Click on Save to confirm the language change.
3. অনুসন্ধান ডিভাইস
   1. In the software’s home page:
4. Click on “Search Device”.
   1. The scan page is divided into two sections:
      1. A. Channel Settings
      2. B. Device Settings
5. A. Channel Settings:
   • Choose the correct communication protocol (Modbus RTU, Modbus TCP, M-bus).
   • Choose the correct COM port.
6. B. Device Settings:
   • Verify and choose the correct Baud rate and Parity.
   • Search in a specific range of addresses or choose all addresses.

সিস্টেমের প্রয়োজনীয়তা

1. হার্ডওয়্যার:
   • Intel® Core 2 Duo or AMD® Athlon X2® processor
   • 2GB RAM
   • 320MB উপলব্ধ হার্ড-ডিস্ক স্থান
   • USB port for connection IDM Configurator
   • সমর্থিত অপারেটিং সিস্টেম:
   • Microsoft Windows XP (Professional) – Service Pack 3
   • Microsoft Windows Vista – Service Pack 2
   • Microsoft Windows 7 – Service Pack 3
   • Microsoft Windows 10 – All Service Pack Installation and Display:
   • কম্পিউটারে
2. মৌলিক ধারনা
   1. The IDM Configuration Software offers the possibility of configuring CONTO Energy meters using a simple and intuitive procedure by the creation of a customized project based on personal needs and the actual system installed.
   2. Note: IDM Configuration Software is free. To be downloaded from the IME web site. Once downloaded it will be useful for all remote configurations of CONTO Energy Meters
3. সামঞ্জস্যপূর্ণ ডিভাইস
   1. সফ্টওয়্যার সংস্করণ 1.00.00
      1. Range CONTO
   2. মডবাস
      1. Conto D2 63A 1ph Modbus (CE2DF3DTCL1)
      2. Conto D2 63A 1ph Modbus MID (CE2DF3DTMID)
      3. Conto D4 63A 3ph Modbus (CE4DF3DTCL1)
      4. Conto D4 63A 3ph Modbus MID(CE4DF3DTMID)
      5. Conto D4 5A 3ph Modbus(CE4TBDTCL1)
      6. Conto D4 5A 3ph Modbus MID(CE4TBDTMID)
   3. Mbus
      1. Conto D2 63A 1ph Mbus MID(CE2DF3MTMID)
      2. Conto D4 63A 3ph Mbus(CE4DF3MTCL1)
      3. Conto D4 5A 3ph Mbus(CE4TBMTCL1)
      4. Conto D4 5A 3ph Mbus MID(CE4TBMTMID)
4. ভাষা উপলব্ধ
   1. ভাষা:
      1. ইংরেজি
      2. Français
      3. ইতালীয়

বাস্তবায়ন

1. প্রয়োজনীয় উপাদান
   1. Installation Kit (executable file “.exe”)
   2. A computer with a compatible operating system (10, 7, etc.)

ইনস্টলেশন

1. চালান file

The installation procedure starts

1. Choose the proper language
2. "ঠিক আছে" ক্লিক করুন
3. Click “Next” 3
   1. The License agreement page appears
4. Click to declare to have read and accepted the contract
5. "পরবর্তী" ক্লিক করুন
6. Click “Browse” to choose the installation folder
7. "পরবর্তী" ক্লিক করুন
8. Click “Next.
   1. ইনস্টলেশন সম্পন্ন হয়েছে
9. "সমাপ্তি" ক্লিক করুন
   1. On the desktop of your computer are created two shortcuts: – Energy management software:
   2. IME – Energy manager software
   3. IME – NEMO SX Configurator
   4. IME – IDM Configurator

Modification of the software’s language

• Procedure for changing language (if necessary)

In the software’s home page

1. Click “Software configuration”
2. Choose the required language
3. Click “Save” to confirm.

অনুসন্ধান ডিভাইস

In the software’s home page

1. Click “Search Device”
   • The scan page is divided to 2 sections:
     • A. চ্যানেল সেটিংস
     • B. ডিভাইস সেটিংস
     • A. চ্যানেল সেটিং
2. Choose the correct Communication Protocols. 3 Software supports :
   • মডবাস আরটিইউ
   • মোডবাস টিসিপি
   • M- bus
3. Choose the correct COM port.
   1. মডবাস আরটিইউ
   2. B. ডিভাইস সেটিংস
4. Verify and choose the Correct Baud rate and Parity, otherwise
5. Choose the All Combinations.
6. Search in a specific range of addresses
7. Choose All addresses.
   1. মোডবাস টিসিপি
      1. First of all, it is needed a TCP gateway interface.
      2. প্রাক্তন জন্যampLe:
      3. SXIIP: gateway Ethernet/RS485 (1:N)
      4. In this case, you need to connect your PC to the same network of your Modbus TCP gateway. (Ethernet)
8. Enter the IP Address of your gateway.
9. Search in a specific range of addresses or
10. Choose All addresses
    1. এম-বাস
    2. First of all, you need a M-Bus Converter
11. Choose the M-Bus Protocol.
12. Choose the correct COM port.
13. Verify and choose the Correct Baud rate and Parity, otherwise
14. Click on Search button
    1. Note: You can search the Primary Addresses o the Secondary Addresses.
15. Click Secondary Addressing for check.
    1. স্ক্যান করুন
16. By clicking on the Search button, a page with the latest Firmware updates will be shoewn:
    1. MID devices are not updatable
    2. আপডেট উপলব্ধ
17. Click Update FW
18. Click “Continue” to go to the edit page of the configuration read.

ডিভাইস ফার্মওয়্যার আপডেট

As soon as the search devices page appears, you can see if updated firmware is available for each module.

1. You can check the small window on top to update all the available firmware updates
2. Otherwise you can uncheck it and choose just the modules you would like to update
3. Finally, click on the update FW button (it might take some time to update, please wait until the software finishes the process)

ডিভাইস কনফিগারেশন

Configuration of devices on your system In the Home page

1. Click “Edit Configuration online”
   1. The Configuration Page will be appeared.
2. কনফিগারেশন পৃষ্ঠা
   1. The page is divided into two sections:
      1. List of the devices
      2. Configuration Settings for the selected device on the section A

TO VIEW/CONFIGURE THE DEVICES CHARACTERISTICS In Settings

1. একটি ডিভাইস নির্বাচন করুন
2. ডিভাইসের নাম পরিবর্তন করুন
3. Click “Connection” and choose the correct connection
4. Click “External input” and choose the correct input
5. Click for assign the other control parameter.
   1. অগ্রিম
6. Click “Advanced” and a set additional parameters are shown
7. Click for assign the other control parameters
8. Click “Save” to confirm

দ্রষ্টব্য:

• Device connected to the Wi-Fi
• Device not connected to the Wi-Fi

To be able to access the saved settings directly, click on “Export Configuration”. For more details, see page 26

• Configurable parameters of each module
  • Examples of Configuration
• View পৃষ্ঠাগুলি
  • In the software’s Home page

1. Click “Visualize project”
   1. Devices display page appears

1. The page is divided into two e sections:
   1. 1. section shows the Devices (Network icon shows if your device is connected or no, (in all 3 protocols: Modbus RTU, Modbus TCP, M-bus)
      2. section is the area where is possible to select several pages (according to the functions present in a Device):
   2. Measure: display of the quantities measured by a device:
   3. Electricity measuring devices: Energy, Power, Voltages / Currents /Frequency, THD, and Harmonics
   4. THD and Harmonics are just available for the Easy Connects.

দ্রষ্টব্য:

• Indicates the active tariff

 Off-line operation

Import a configuration In the Software’s home page

1. Click “Import Configuration”
   1. System configuration appears
2. নির্বাচন করুন file to import (e.g. Configuration.XML), then
3. click “Open”
   1. 1. Configuration is ready to be edit
4. Export a configuration

In the System configuration page

1. Click “Export configuration.”
   1. A pop-up window appears
   2. Select where to save file, তারপর
   3. "সংরক্ষণ করুন" এ ক্লিক করুন
      1. Configuration is saved on your computer

প্রায়শই জিজ্ঞাসিত প্রশ্নাবলী

Q: What are the supported communication protocols for device settings?

A: The software supports Modbus RTU, Modbus TCP, and M-bus protocols for device settings.

দলিল/সম্পদ

IME IDM Configuration Software [পিডিএফ] নির্দেশিকা ম্যানুয়াল CE2DF3DTCL1, CE2DF3DTMID, CE4DF3DTCL1, CE4DF3DTMID, CE4TBDTCL1, CE4TBDTMID, CE2DF3MTMID, CE4DF3MTCL1, CE4TBMTCL1, CE4TBMTMID, IDM Configuration Software, Configuration Software, Software

তথ্যসূত্র

• ব্যবহারকারীর ম্যানুয়াল